|
xrwag94 |
|
|||
|
Hi all,I am wondering how can i tell if puter is genuine.Is there a number or something.Its a 1994 xr6 auto.Thanks
|
|||
Top | |
Krytox |
|
|||
|
There is a code on the top connector
and also on the bottom plastic cover (addon socket) and should be one of these: Auto: 4TBC 4TBD Manual 4TAB 4TAC 4TAD etc. if its 4TEG (e in the middle) its a tickford gas and worth about 4c's
_________________ Carefree, we may not be number one, but we're up there. |
|||
Top | |
xrwag94 |
|
|||
|
Thanks Krytox will go and ave a looksky :D
|
|||
Top | |
xf_xr6 |
|
||
|
I was going to post a new thread, but might be able to get my answer here....
if i was to get an xr6 diff (3.45) and the xr6 computer, would it make a noticeable difference?? Or would the computer not really do that much considering its not the xr6 motor... Its for an EL futura. Cheers Matt |
||
Top | |
Krytox |
|
|||
|
lets just say the ECU is optimum for the gear changes.
it will change gear at higher revs and may even do it faster. Many many ppl use the XR ecu in stock motors as its more tame with wilder cams also you'll need to change the speedo gear in the gearbox itself. it won't make a difference to shifts but it'll make a difference to Mr. plod actually, if you don't change it and you sit on 60... you'll most likey be doing 55ish. hope this helps
_________________ Carefree, we may not be number one, but we're up there. |
|||
Top | |
HaZZa |
|
|||
|
is it the same for a el xr6 ecu ? coz im trying to work out if this is genuin.
|
|||
Top | |
Pulco |
|
||
|
Krytox wrote: lets just say the ECU is optimum for the gear changes.
it will change gear at higher revs and may even do it faster. Many many ppl use the XR ecu in stock motors as its more tame with wilder cams also you'll need to change the speedo gear in the gearbox itself. it won't make a difference to shifts but it'll make a difference to Mr. plod actually, if you don't change it and you sit on 60... you'll most likey be doing 55ish. hope this helps wrong....if u have a 4.35 diff get the ecu cause it has the right shift points for the auto...ifu l eave the other one in there, and u rev the engine out it will hang b4 it changes gear, i got a an xr ecu and now as soon as i git about 5000 its changes
_________________ |
||
Top | |
xrwag94 |
|
|||
|
Hi all, i just got around to taking my computer out and it has a 3TBA on it. idoubt whether this is genuine.I could not find any of the above codes anywhere. Damn it i think the computer has been swapped.I have also found that it wont rev past 4000 in 3rd,could this be why? :?
|
|||
Top | |
TwistedEL |
|
|||
|
3TBA looks like an ED Auto XR6 to me
Correct me if I'm wrong |
|||
Top | |
xrwag94 |
|
|||
|
||||
Top | |
xrwag94 |
|
|||
|
||||
Top | |
andrewts |
|
|||
|
That certainly is an ED EEC4 Computer, you've been conned my main man!
EDIT: f you own an ED XR6, then you haven't been conned, actually. Last edited by andrewts on Thu Jan 25, 2007 12:48 pm, edited 1 time in total. |
|||
Top | |
Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
haha! you've got an ED XR6 don't you! the ones above are ef codes afaik
_________________ |
|||
Top | |
Steady ED |
|
|||
|
Nah, thats an ED XR ECU.
93DT. More then likely genuine, does it have "ED XR AUTO" written on it anywhere in texta EFs get 94 part numbers. Krytox assumed you had an EF. When you say wont rev past 4000 in 3rd, what do you mean? It shifts then at WOT, or the car literally wont rev over it when it's held in 3rd? Doesn't sound like an ECU problem.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
t66_bt1 |
|
|||
|
if u put a stock ef ecu in an ef xr6 would it do any damage? i want to give my ecu to a ford mate to flash cop spec on but dont want to lose my car for that day!
_________________ R.I.P George.D.Gogas!!!
|
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 22 guests |