|
anthony cure |
|
||
|
hay guys, ok i've got a recond xh xr6 motor that will be goin in my ef fairmont soon but im not sure if its gonna give me dramas with my ecu or not? and is there much else ill have to change? cheers
_________________ ef fairmont,auto,lowered 2inchs on kings,17csa,pacemaker extracters,2 1/2 straight through redback system,k/n filted,big mouth cai,pbr trans cooler,twinlight head lights. |
||
Top | |
anthony cure |
|
||
|
or could i just reset the fairmont ecu? any help would be much appreciated!
_________________ ef fairmont,auto,lowered 2inchs on kings,17csa,pacemaker extracters,2 1/2 straight through redback system,k/n filted,big mouth cai,pbr trans cooler,twinlight head lights. |
||
Top | |
TROYMAN |
|
||
|
your fairmont ecu will be fine..
you may need to add the crank angle sensor,harmonic balancer and the cam sensor from the ef engine to the xh engine, as xh runs a dizzy and ef runs coil pack.. otherwise your good to go... |
||
Top | |
JOSE |
|
|||
|
as above, add the sensors to the XH engine from your EF engine and your good to go, im running an ELXr6 engine with an ED gli ECU with no probs
_________________ Because i can. |
|||
Top | |
anthony cure |
|
||
|
ok yea i no bout the coil packs and sensors but thats good news i can run same ecu excellent. thanks for that guys aye
_________________ ef fairmont,auto,lowered 2inchs on kings,17csa,pacemaker extracters,2 1/2 straight through redback system,k/n filted,big mouth cai,pbr trans cooler,twinlight head lights. |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 15 guests |