|
| twr7cx |
|
|||
|
Anyone know is number 1 cylinder is the one closts to the timing belt or the one furtherst away?
I'm buys doing a timing belt on a VTEC Honda Accord, need to put it at top dead, so I've lined the harmonic balance up, lifted the distributor cap off and it's either point to number 1 or number 4. if it's number 4 i need to rotate the crank another revolution. |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
yes number one is the front cylinder. (the non gearbox end)
|
||
| Top | |
||
| xpression |
|
|||
|
if your doing a timing belt does it really matter?
|
|||
| Top | |
|||
| Disco Frank |
|
|||
|
{USERNAME} wrote: if your doing a timing belt does it really matter?
thats my thinking just rip off the belt and change and disconnect battery to make sure u cant accidently attempt to start engine and btw f**k ALL CARS are number 1- whatever from the front of the engine ( or water pump side, non gearbox side etc ) unless it is a V engine where it can be different iirc the #1 cyl there is passenger side front ( or front right when looking front to back of engine ) some engines will be differnt of course ohh did u check the plug leads? they can be numbered
_________________ RIP SCOTT |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
{USERNAME} wrote: {USERNAME} wrote: if your doing a timing belt does it really matter? thats my thinking just rip off the belt and change and disconnect battery to make sure u cant accidently attempt to start engine and btw f**k ALL CARS are number 1- whatever from the front of the engine ( or water pump side, non gearbox side etc ) unless it is a V engine where it can be different iirc the #1 cyl there is passenger side front ( or front right when looking front to back of engine ) some engines will be differnt of course ohh did u check the plug leads? they can be numbered on a V engine number 1 is still the forward most cylinder. some engines it front left some it's front right |
||
| Top | |
||
| twr7cx |
|
|||
|
{USERNAME} wrote: if your doing a timing belt does it really matter?
Because when you pull the camshaft and crank shaft sprockets off and replace the seals behind them. then tighten them back up. You can check that they along with the 2 balance shafts are all still in there proper position. saves having to go back later if there 1 tooth out etc. |
|||
| Top | |
|||
| twr7cx |
|
|||
|
{USERNAME} wrote: ohh did u check the plug leads? they can be numbered
yes i did and they're not. |
|||
| Top | |
|||
| xpression |
|
|||
|
ive always found that marking the old belt and pulleys etc, and transfering those marks to the new belt always works well too, and serves as a double check that u have the correct new belt.
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
{USERNAME} wrote: ive always found that marking the old belt and pulleys etc, and transfering those marks to the new belt always works well too, and serves as a double check that u have the correct new belt.
That's a decent idea. will use it next timne. |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
{USERNAME} wrote: ive always found that marking the old belt and pulleys etc, and transfering those marks to the new belt always works well too, and serves as a double check that u have the correct new belt.
it will also help you get the cam timing wrong if the guy befor you didn't get it right. you'll just be transfering his mistakes |
||
| Top | |
||
| Macca |
|
|||
|
Have you done this yet, did you work out Honda engines run anti clockwise
 Makes a huge difference when turning over and checking timing marks due to belt deflection is different, if this is anything like most of the other mid 90's Hondas have fun getting the timing marks to line up, you have to make a judgement call and hope for the best.
_________________ 93 Ford Maverick LWB automatic petrol guzzler (gets stuck where Deli doesn't, big pumpkins |
|||
| Top | |
|||
| twr7cx |
|
|||
|
{USERNAME} wrote: Have you done this yet, did you work out Honda engines run anti clockwise
Makes a huge difference when turning over and checking timing marks due to belt deflection is different, if this is anything like most of the other mid 90's Hondas have fun getting the timing marks to line up, you have to make a judgement call and hope for the best.Done almost 2 weeks ago now! Yeah, I was aware of the anti-clockwise. She's running fine. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
)