|
Steezy |
|
||
|
So I'm having some issues with my 03 NA Falcon, basically it's getting around 380kms to a tank (16.1l/100km) apparently. I've replaced everything the mechanics suggested including;
New plugs 02 sensor New coil packs All fluids and coolants All filters All of this was done in the last 2-3000kms. The only modifications are extractors, a 2/5inch exhaust and mace intake. The problem I'm having is the car seems to lose power when accelerating every now and then and feels as if it's going to stall. It feels as if it puts itself into a higher gear and won't rev, that's the best way I can describe it. The ABS light recently has come on and causes issues with the breaks but I don't think this would be related? If anyone has an answer please help because I've thrown a lot of money at fixing things and nothing seems to do it! Cheers |
||
Top | |
Papa Smurf |
|
||
|
Have you checked the Throttle Position Sensor yet? Checked for exhaust or intake leaks?check all the bolts for the inlet and exhaust manifold?
|
||
Top | |
rod hansen |
|
||
|
Go back to your mechanic and get him to check all the live data with a scan tool, too many possible problems. Air leaks in the exhaust, air leaks in your inlet manifold, they run a tmap system in that vacuum and inlet air temp, app pedal and a duty cycled throttle body five functions there alone, variable valve timing and so on, without a scan tool looking at live data you are pissing in the wind.
|
||
Top | |
Steezy |
|
||
|
rod hansen wrote: Go back to your mechanic and get him to check all the live data with a scan tool, too many possible problems. Air leaks in the exhaust, air leaks in your inlet manifold, they run a tmap system in that vacuum and inlet air temp, app pedal and a duty cycled throttle body five functions there alone, variable valve timing and so on, without a scan tool looking at live data you are pissing in the wind. Thanks for the quick reply. I've been tossing up taking it to Ford as I thought they might have better means of testing that sort of stuff but I've heard nothing but bad news from them in Tassie. My question is; is my ordinary mechanic able to test these things or would I need to book in to a performance shop or ford? And I haven't changed the TPS yet as I didn't want to spend money on that too and it turns out it's fine. Thanks for the quick replies! |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 68 guests |