Hey Guys

Some of you's know of my car already and some of you dont, its a EA mocked up to be a EB GT.

She has NO HEADWORK, just shaved to raise comp, ACL bottom end, Bored Out TB, Pod Filter out the bonnet, FULL 3 inch exhaust, and a Wade1673 Cam with 3.7 LSD and a EA-T5 running on a STOCK TICKFORD ECU with AU injectors.

I bought some semi slicks off a member the other week, and put them on for tonite, wasnt looking like i was going to get much runs being there was STACKS of cars...

Headed down with my mate josh whos a member on here, and managed 3 before they shut the gates.

1st run was with 22PSI in the semi slicks, i dumped it 4000rpm and got axle tramp and wheel spin with a average shift into 3rd...managed 14.076 @ 159.79KM/H with a 1.998 60 Footer, then we downed the pressure to 18PSI and i did a btter burnout and managed a 13.902 @ 160.91KM/H with a 1.909 60 Footer this time hitting the rev limiter in 4th at a decent distance from the finish, so i just held it.
Then i managed a 13.797 @ 157.16KM/H with a 1.921 60 Footer and i was silly enough to attempt 5th which i missed so i beilive i lost some KM/H trying to, maybe a 13.6 was in stores if i held the limiter in 4th instead...


Either Way, i have PROVED to all the haters out there, that the RWKW dyno readings ive been pulling lately arent just numbers, its felt real quick, and lately pulled 177RWKW thanks to paul from CVE, just by mucking with the timing a bit.

Im VERY happy with this time, as i beilive its ONE of the fastest N/A 4L i6 times out there, (up with OED666 etc)

So i just wanna say thanks to the people who beilived in me, and STFU to the people that doubted me and said, "run it, no way a stock head can flow over 160rwkw"

Cheers

-Grechie

P.S ill post up the time slips when i scan them some time tommorow!

awesome effort....great result!!

what head has it got? EA or EF or something???

holy f**k........ i knew the Ea's were lightweights, but that time was got with power and plenty of it.

Thats awesome. What comp ratio you running?

Nice work Grechie very quick times from a N/A 6i.
Keep up the good work.

very good results! you running the log manifold or BBM on the EA.

Interesting with the 3" exhaust. Much difference over the 2.5? Nice time by the way!

What does N/A mean? i always thought it meant normally aspirated so i must be wrong

Great work mate

Thats a killer time man well done,what was the pb before the 13.7?

It does mean Naturally Aspirated.
This is neither blown or boosted, so what you getting at?

arghh fleck. sorry for taking it off topic!! red the first post wrong...
Great work Grechie!!!

Hey guys

gogetta - I have a stock EB head with au headgasket, just shaved to raise the compression

FordFairmont not sure on the comp ratio, ill have to do a compression test soon n get back to yas

EL__Fairmont, im running the EA-ED log manifold with a bored out TB

Doofus to be honest, i didnt notice any more power with the 3 inch to start off with, but when i got the timing backed off and dyno'd it, it pulled more power up top.

green car - My PB before all this was 14.43 @ 96mph

and yea my car is Naturally Aspirated.

Mate well done.
The work you have done to me anyway suggests you may be able to go quicker,so more power to you.

this confirms that porting does f**k all on these heads...

if u have a look at the ports they look quite good stock, maybe just a small cleanup of casting dags (not that there are many) and port matching....

if u look at the ports on an old 351 for eg, they look totally s**t and its no wonder people port them.....seems modern heads generally dont need much done to them

ill be rebuilding my EF XR6 motor soon and this has convinced me to save the money on head work and put it toward a good cam and tuning instead...

Ive read somewheres that the falcon head from EB-AU is good to flow in excess of 300 hp stock. so say 325 hp for example is about 239 kw... 239 engine kw would read around 170+ rwkw, so its definately within reason that anyone that doubts your power figures is just jealous

good work mate. Id say you have gone about as far as the head alone can go without internal work. champion!