|
young falcon |
|
||
Age: 28 Posts: 25 Joined: 24th Jan 2015 Ride: 1994 Falcon futura Wagon Location: Elizabeth East |
Hi guys I'm new here and have a classic 3.9 issues like the usual head gasket so I would like some advice on what to do also it is the single point fuel injected with gas/petrol if it helps
|
||
Top | |
SWC |
|
||
|
What are you wanting?
Head gasket replacement? |
||
Top | |
young falcon |
|
||
Age: 28 Posts: 25 Joined: 24th Jan 2015 Ride: 1994 Falcon futura Wagon Location: Elizabeth East |
Yes it is a head gasket but also should I overhaul the entire cooling system as well? Because it had a habit of overheating unless the car was idling down a hill
|
||
Top | |
Mad2 |
|
|||
|
at least check ya radiator. always use a good coolant
|
|||
Top | |
young falcon |
|
||
Age: 28 Posts: 25 Joined: 24th Jan 2015 Ride: 1994 Falcon futura Wagon Location: Elizabeth East |
Hi guys I'm here with another update on the car I have noticed that there is white goop under the oil filler cap but the oil is fine as in it is not a milky and my coolant is not going down so what else could make it run like crud?
|
||
Top | |
SWC |
|
||
|
young falcon wrote: Hi guys I'm here with another update on the car I have noticed that there is white goop under the oil filler cap but the oil is fine as in it is not a milky and my coolant is not going down so what else could make it run like crud? Milky residue on the filler cap indicates water in the oil. Have you checked the oil on the dipstick after the car has been running and warmed up? When was the last time you changed your oil? |
||
Top | |
Mad2 |
|
|||
|
it's condensation from water in the system ...... to make sure go to a radiator joint & see about getting the coolant system pressure checked. this should let ya know if & maybe where the problem is
|
|||
Top | |
young falcon |
|
||
Age: 28 Posts: 25 Joined: 24th Jan 2015 Ride: 1994 Falcon futura Wagon Location: Elizabeth East |
Hi guys I'm here with another update on the car I have noticed this thing called liquid intelligence 245 and the makers claim that if put in correctly there is a 90 percent chance that it would work I reckon I should give it a go
|
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 87 guests |