|
| voxace |
|
|||
|
A shift kit is merely a a few resistors and some wires joined together... and if you call a nice solid chirp into second working, then yeah they work well.
Powerchips are worthless, get a cam for the money. Remember you can get a Wade cam, shims and a new rocker cover gasket for like $200. And welcome to the site Tim. 
|
|||
| Top | |
|||
| TimmyA |
|
|||
|
Thanks,
Sorry my mistake i first thought short shift for a manual, as in short throw, coz that's what i own, my bad. Sweet as, shame this cam from crow is worth 600 bucks i haven't heard of the brand of cam you use. Are they any good and is there a website or email address whereby i could get in touch with someone? Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| voxace |
|
|||
|
I use an RPD cam, they are no longer around to sell cams unfortunately.
If you are talking asbout the wade cams I mentioned, I have used them before too. They have a section on this forum, and are also at http://www.wadecams.com/ And yeah those shift kits are for autos. Thankfully you have a manual, which are so much better
The short shifters for those are a few hundred bucks. |
|||
| Top | |
|||
| Jaysen |
|
|||
|
The short shifters with a positive stop are worth thier weight as the T5 doesnt have built in stops for the shift rods, which means that the stops on the shifter will help preventing the shift forks from becoming bent.
_________________ Dima, Mitch & Jay's RPD |
|||
| Top | |
|||
| nick_167 |
|
||
|
Well done voxace... finally i hav found what i was looking for... everyone says do this do that but i can finally work out what i want/need in terms of bang for your buck!!!
_________________ BF XR6T ZF 6sp |
||
| Top | |
||
| ngibson |
|
||
|
Hey i recently installed a Spack Cluster into my EA and the Taco, oil Pressure, Volt meter and odomoter dont work. Is this the wiring or what?
Some help would be greatly appreciated Cheers
_________________ Rabbits Disfigured Body.....................................................Looks like he needs a body KIT
|
||
| Top | |
||
| alfy |
|
|||
|
ngibson wrote: Hey i recently installed a Spack Cluster into my EA and the Taco, oil Pressure, Volt meter and odomoter dont work. Is this the wiring or what?
Some help would be greatly appreciated Cheers well well well, fancy seeing you here 
there is a pink wire behind the front right strut that is the tacho wire. ill pop round and wire it up for you if you like.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| ngibson |
|
||
|
HAHA ALFY U ARE GOING TO COME ROUND AND WIRE IT UP HEY!!!
I THINK ITS SOMETHINNG TO DO WITH THE CLUSTER ITSELF CAUSE THE ORIGINAL STILL WORKS AND YER..... 
SO WHEN ARE YOU COMING TO DO IT!!!! 
_________________ Rabbits Disfigured Body.....................................................Looks like he needs a body KIT
|
||
| Top | |
||
| ngibson |
|
||
|
Im sitting right next to you and we are talking over the net
haha so silly
_________________ Rabbits Disfigured Body.....................................................Looks like he needs a body KIT
|
||
| Top | |
||
| alfy |
|
|||
|
nathan ur gonna get banned if u keep posting useless s**t in this thread
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| ba falcon |
|
||
|
Voxace sorry i used ur info on another forum
 i fixed it up and put a link to this sit and gave u credit for this info
_________________ (.Y.) |
||
| Top | |
||
| efmarek |
|
||
|
WHY THE HELL DO PEOPLE BOTHER WITH BRANDS LIKE...WADE, CROW, LUKEY...etc ???!! THERE IS ONLY 1 THAT WILL GIVE U BEST PERFORMANCE IN ALL THEIR PRODUCTS....AND THATS Jim Mock Motorsport!!! WHY? Because all JMM products are INTENSELY R&D'd!!. AND THEY HAVE EVERYTHING YOU WILL EVER NEED TO MAKE YOUR FALCON FLY! SO DONT WASTE YOUR MONEY WITH OTHER BRANDS!!
_________________ LUMPY-6 |
||
| Top | |
||
| phongus |
|
|||
|
efmarek wrote: WHY THE HELL DO PEOPLE BOTHER WITH BRANDS LIKE...WADE, CROW, LUKEY...etc ???!! THERE IS ONLY 1 THAT WILL GIVE U BEST PERFORMANCE IN ALL THEIR PRODUCTS....AND THATS Jim Mock Motorsport!!! WHY? Because all JMM products are INTENSELY R&D'd!!. AND THEY HAVE EVERYTHING YOU WILL EVER NEED TO MAKE YOUR FALCON FLY! SO DONT WASTE YOUR MONEY WITH OTHER BRANDS!!
did you have to use capital letters? and its personal preference you goose...now shoo phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| MIDA8939 |
|
|||
|
efmarek wrote: WHY THE HELL DO PEOPLE BOTHER WITH BRANDS LIKE...WADE, CROW, LUKEY...etc ???!! THERE IS ONLY 1 THAT WILL GIVE U BEST PERFORMANCE IN ALL THEIR PRODUCTS....AND THATS Jim Mock Motorsport!!! WHY? Because all JMM products are INTENSELY R&D'd!!. AND THEY HAVE EVERYTHING YOU WILL EVER NEED TO MAKE YOUR FALCON FLY! SO DONT WASTE YOUR MONEY WITH OTHER BRANDS!!
That my friend is a very big statement you need to be careful in how you come across with bias towards one particular item. There are a lot of people that i have heard of that in actual fact would argue the opposite. It sounds like they have raped you for all your earnings and are hangin out your rear end. That is what competition is out there for people to have just that competitive market places JMMS are not the only companyto have been developing I6 fords You have company's such as Mike's dyno andby the way not bad for a company that trades as The 308 shop. Anyway enough of this shiiiiiit only gettin down to your level of blindness .End of the day people do have choices ....And as well as competitive PRICING JMM are not the cheapest around....But are one if not the dearest around for people on a budget...All there literature that has been in performance mag rebuild Have been on a EA/EB 3.9 I have not seen a article outlining enhancements on the later 4.0lt .If wrong on this part can somebody give me info as to magazines it has appeared in... Best of luck in drumming up business for them but i am afraid to say they wont be getting mine or a few other peoples I know  
|
|||
| Top | |
|||
| skidder |
|
|||
|
efmarek wrote: WHY THE HELL DO PEOPLE BOTHER WITH BRANDS LIKE...WADE, CROW, LUKEY...etc ???!! THERE IS ONLY 1 THAT WILL GIVE U BEST PERFORMANCE IN ALL THEIR PRODUCTS....AND THATS Jim Mock Motorsport!!! WHY? Because all JMM products are INTENSELY R&D'd!!. AND THEY HAVE EVERYTHING YOU WILL EVER NEED TO MAKE YOUR FALCON FLY! SO DONT WASTE YOUR MONEY WITH OTHER BRANDS!!
you must be the biggest douche...i take it you got exhaust and a cam and pulled 180wkws on his dyno 
from what i've read there's no evidence that JMM has "INTENSELY R&D" (it's spelt wrong) with there being just as many good and bad reviews as any other place...so to come out and say WHY THE HELL DO PEOPLE BOTHER WITH BRADS LIKE WADE, CROW, LUKEY (all of which i've heard better reviews of then JMM) just shows you as naive
_________________ EVL098 wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 74 guests |
