|
| bulma90 |
|
||
|
i want to put a new full exhaust sytem, cam and air intake on my ba fairmont. I am lookin for a nice deep note from the exhaust and low down torque more so than high-end power. also want the lumpy idle. any suggestions on who to go through and wat i would need? also any experiences with these mods on power and fuel usage would b appreciated.
|
||
| Top | |
||
| ebxr82nv |
|
||
|
I don't think I've heard a na ba/f with a lumpy idle. Not sure if you can do it with the twin cam.
_________________ 9/98 AU1 XR6hp-about to retire from the road and be reborn on the race track. |
||
| Top | |
||
| fordfreak ef |
|
|||
|
ebxr82nv wrote: I don't think I've heard a na ba/f with a lumpy idle. Not sure if you can do it with the twin cam. you can! crow cams!!!! watch the video... -lumpy NA i6..
http://cgi.ebay.com.au/CROW-CAMS-F6-FPV ... 240%3A1318 |
|||
| Top | |
|||
| fordfreak ef |
|
|||
|
sounds the best in the clip from the 26-32 second..
|
|||
| Top | |
|||
| skidder |
|
|||
|
look for headers with longer and narrower primaries (although no so narrow such that they overly choke it up top - doubtful with off the shelf items). I think pacemakers use 41mm primaries; I definately wouldn't go any bigger than this when looking for down low torque.
Also a lumpy idle is generally reminiscent of cams with big lift and longer duration, more suited to mid to high revs. If you are looking for low down torque then generally the idle wouldn't be as lumpy as what I assume you're looking for. I'm not sure of what cams are offered for the DOHC head, but I was pretty sure I have seen people getting good results from getting a tune on the DOHC engines without touching cams.
_________________ EVL098 wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| phatba |
|
||
|
bulma90 where in perth are you? theres a good exhaust place in kenwick called HansOn exhausts. used him for both my falcons. have a chat to them about what you want and what budget you have, they should be able to suggest something.
|
||
| Top | |
||
| bulma90 |
|
||
|
hey im form baldivis. wat do u think of the pacemaker headers? I am lookin gettin that brand.
|
||
| Top | |
||
| fordfreak ef |
|
|||
|
bulma90 wrote: hey im form baldivis. wat do u think of the pacemaker headers? I am lookin gettin that brand. ive had pacemakers... great build quality... fitted up perfectly.... |
|||
| Top | |
|||
| bulma90 |
|
||
|
fordfreak ef wrote: ebxr82nv wrote: I don't think I've heard a na ba/f with a lumpy idle. Not sure if you can do it with the twin cam. you can! crow cams!!!! watch the video... -lumpy NA i6..i like the sound of that car. the cam sounds lyk xactly wat im lookin for. thnx http://cgi.ebay.com.au/CROW-CAMS-F6-FPV ... 240%3A1318 |
||
| Top | |
||
| ebxr82nv |
|
||
|
fordfreak ef wrote: ebxr82nv wrote: I don't think I've heard a na ba/f with a lumpy idle. Not sure if you can do it with the twin cam. you can! crow cams!!!! watch the video... -lumpy NA i6..http://cgi.ebay.com.au/CROW-CAMS-F6-FPV ... 240%3A1318 Hope they're better than the one I got.
_________________ 9/98 AU1 XR6hp-about to retire from the road and be reborn on the race track. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 1 guest |
