|
dannoxr6 |
|
||
|
Hey guys
Got extractors installed yesturday, found out he installed the 4499's when i specifically wanted the 4480's. He knows this and the way things look he will change them to the 4480's no extra charge. So, should i keep the 4490's or go the 4480's ..... ???? I have a 5sp EL xr6, and in the future looking to install a Rspec3 or 2 cam or similar Thanks.
_________________ 5sp EL XR6, KYB AGX struts, Lovells springs, Pacemaker 44??'s, 2.5'' exhaust.... |
||
Top | |
Travy |
|
|||
Age: 45 Posts: 146 Joined: 22nd Aug 2006 Ride: ED fairmont Ghia rollin on 18's Location: mildura |
whats the difference?
_________________ |
|||
Top | |
phongus |
|
|||
|
4480s have better low end torque then 4499s i think? and are better all round on all revs?
correct me if im wrong...im just taking a stab from what ive learnt
_________________ phongus = Post whore 2006 |
|||
Top | |
nannas_ed |
|
|||
|
doubt you will get to keep the 4499's they will just replace them with the 4480's
_________________ |
|||
Top | |
nannas_ed |
|
|||
|
phongus wrote: 4480s have better low end torque then 4499s i think? and are better all round on all revs?
correct me if im wrong...im just taking a stab from what ive learnt 4499's produce more power down low where as the 4480's produce power higher in the rev range. but if you have a reletivly big cam the go the 4480's
_________________ |
|||
Top | |
Mash85 |
|
||
|
i think he means should he keept he 4499's on there or get them changed over to the 4480's
_________________ |
||
Top | |
dannoxr6 |
|
||
|
yeh my choice is do i keep the 4499's on, or do i change them for the 4480's... keeping in mind im aiming for a cam
_________________ 5sp EL XR6, KYB AGX struts, Lovells springs, Pacemaker 44??'s, 2.5'' exhaust.... |
||
Top | |
ea_5_spd |
|
||
|
which 1's r the bigger 1's? i got the biggest 1's dunno what the part no. is!!! they helped my car get 125.6rwkws
_________________ mods: pacemaker extractors, 2.5in red back ,lowered with pedders 17" rims, extreme h/d ceramic clutch, 3.45 ef lsd, and rear brakes, clear indicators, ef thermo's, stage 2 crow (daily) |
||
Top | |
stockstandard |
|
|||
|
Get the 4480!!!
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
Top | |
phongus |
|
|||
|
wait 4499s have better torque down low? what happens if u get a cam with a 4499?
whats the difference between cam and 4480s compared to the cam 4499....same cam on both situations phong =P~
_________________ phongus = Post whore 2006 |
|||
Top | |
Krytox |
|
|||
|
if you paid for 4480's by all means change them!
if you paid for 4499's and are happy with the power/combo keep them I've 4499's and I seem to make pretty good power and I'm plenty happy with em! but most ppl say the 4480's are s**t better. pro's + cons with both. but then again, if they 'f%&ked up with you once... do you want them butchering again for free?!
_________________ Carefree, we may not be number one, but we're up there. |
|||
Top | |
dannoxr6 |
|
||
|
yeh im just happy to have extractors atm !!!
but i paid for and wanted the 4480's... and i think i will get them swaped over. just thought while i had the chance to choose, I wanted to see what ppl thought, specially since im after a cam in the future.
_________________ 5sp EL XR6, KYB AGX struts, Lovells springs, Pacemaker 44??'s, 2.5'' exhaust.... |
||
Top | |
EB91XR6 |
|
|||
|
see if you can get a refund as its not what you asked first and try for free extractors
_________________ 1976 XC falcon
|
|||
Top | |
dannoxr6 |
|
||
|
hahah i wish, free would be awsome! ..... i havent even paid for them yet, should end up costing $400 when i decide which ones i want
_________________ 5sp EL XR6, KYB AGX struts, Lovells springs, Pacemaker 44??'s, 2.5'' exhaust.... |
||
Top | |
Steady ED |
|
|||
|
4480's no question.
Cause you have either paid for 4480s and only got 4499s, or you will be getting 4480s for the price of 4499s.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 59 guests |