|
| gogetta |
|
|||
|
was talking to a guy who works for C.O.M.E Racing, he reckons their 4.2Lt stroker Holden V6 can put out up to 300Kw at the flywheel...
First of all I dont know what needs to be done to reach this level but how far behind is the ford I6 from this???
_________________ |
|||
| Top | |
|||
| alfy |
|
|||
|
i doubt a holden motor could get to 300fwkw
i reckon CMS's 4.8 would be putting out about 250fwkw? with stage 2 head and cam? (i think)
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| gogetta |
|
|||
|
yeah its pretty impressive for a total piece of crap eh!!!
I need some ammo to defend the I6 against this over-rated turd pile
_________________ |
|||
| Top | |
|||
| alfy |
|
|||
|
i reckon the 4.8 with the CMS stg 4 head and cam would be getting pretty close...
id imagine the holden 4.2 would have an idle that belongs in a V8 supercar?
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| gogetta |
|
|||
|
yeah Im not counting the 4.8 because its kinda not availble yet....
head flow from the I6 head is upto around 360-385Hp....so thats really getting close to 300kw I asked the guy what cam ud need to get 300 from the ecotec and he reckons 260, which I reckon is B.S.....more like full race spec as you say
_________________ |
|||
| Top | |
|||
| fordfreak ef |
|
|||
|
nah...300kw would not be a street driven engine... would be a total pig to drive and you wouldnt get that high anyhow..
|
|||
| Top | |
|||
| fnp |
|
|||
Age: 39 Posts: 4401 Joined: 25th Mar 2005 Ride: BA XT, BA XR6T, ED Ghia 5.0 Location: Perth |
yeah, I'd hate to drive a 300kw ecotec on the road O_O
_________________ What's the difference between a Holden and a sheep? It's less embarrasing getting out of the back of a sheep.. |
|||
| Top | |
|||
| cboz |
|
|||
|
Don't the Commo's achieve around the 140rw/kw mark when they are worked off their face?
|
|||
| Top | |
|||
| alfy |
|
|||
|
cboz wrote: Don't the Commo's achieve around the 140rw/kw mark when they are worked off their face?
nah that must be on the JMM dyno... real figure is somewhere around 110rwkw 
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| fnp |
|
|||
Age: 39 Posts: 4401 Joined: 25th Mar 2005 Ride: BA XT, BA XR6T, ED Ghia 5.0 Location: Perth |
I have seen an n/a VN V6 run a mid 13 quarter mile.. don't know how much power it had, but it was supposed to have had some fairly serious work done to it.
_________________ What's the difference between a Holden and a sheep? It's less embarrasing getting out of the back of a sheep.. |
|||
| Top | |
|||
| Steady ED |
|
|||
|
gogetta wrote: yeah its pretty impressive for a total piece of crap eh!!!
I need some ammo to defend the I6 against this over-rated turd pile Don't bother, just LOL at the buick owner and mention he could have had a 304 out to 355 and running 10s for the same money he's spent on his 3.8.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| GeZza200 |
|
||
|
what would it be in rwkw? 230-240? So it has trippled its power still stayin NA, i dont think so.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| krisisdog |
|
|||
|
just tell him to put the crack pipe down - its bad for your health.
|
|||
| Top | |
|||
| ReGiE |
|
|||
|
the old man has a 92 reynard formula holden and its got the VN motor in it and its pushing 350fwhp!. now i would imagine the motor is wokre off its tits, cause the last morot had a pison go through the block on the track
_________________ Gooooone - Eb2 Coon - 143RWKW |
|||
| Top | |
|||
| gogetta |
|
|||
|
I dont doubt the claim of 300kw...C.O.M.E are one of the best performance V8 builders around....
they may be only slightly exaggerating their claim.... and as regie says the formula holden has 350hp from 3.8....this is a 4.2 so that would equal 385hp (287kw)
_________________ |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 33 guests |
