|
TheMont |
|
|||
|
i know the 6 speed autos are only new out to the fords but does any one know if they'll fit in an el. is the housin and the shifter placement the same ba to el???
_________________ '97 EL Fairmont - 2.5" catback system, K&N Panel Filter, Redback Xtractors, NGK-R's, Eagle One 9mm Leads. |
|||
Top | |
opto |
|
|||
|
I think you will find they are 6 speed manuals, somebody correctm e if I'm wrong.
_________________ I post here cos the russian tank driver doesn't |
|||
Top | |
EFFalcon |
|
|||
|
the BF has an optional 6 speed auto available.
i'd be inclined to say it'd need a custom bell housing. shifter location wouldn't be too different at a guess. you'd also need the electronics to run it. while i imagine it could be done in the long term, it would currently be a very expensive option.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
Top | |
Smackdown |
|
|||
|
The manual T56 6 speed box will fit an e-series with a modified bell housing. This leads me to believe that the 6 speed auto would fit with a custom bell housing as well.
However....because this is a 'thinking' gearbox, I'm not too sure about compatibility issues with the ecu.
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
Top | |
Rapier |
|
||
|
yeah y bother be a lot of work to get it to work in the car there would be better mods u could do for a lot less cash
|
||
Top | |
falconea |
|
||
|
The gearbox would be worth more than the car
_________________ Drive safe, arrive alive
|
||
Top | |
Smackdown |
|
|||
|
falconea wrote: The gearbox would be worth more than the car
What he said.
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
Top | |
wardy0 |
|
||
|
anything fits with enough money thrown at it!!
_________________ i cant be bothered thinking of something to write here |
||
Top | |
Spork |
|
|||
|
The 6-Speed does not have a seperate bellhousing. It's integral to the maincase.
Shifter location shouldn't matter, the shifter is only connected by a cable same as the 4-speeds. In theory it could all be done quite well if you converted to a BF 6-Speed ECU at the same time. Might as well buy a BF.
_________________ Manual EL Gli.
|
|||
Top | |
Smackdown |
|
|||
|
But would a BF ecu work with the SOHC 4.0L?
Doubt it. If any of the cars will it will either be the EFs or AUs as they have coil packs and not dizzys.
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
Top | |
wardy0 |
|
||
|
but the bf has seperate coils per cylinder?
_________________ i cant be bothered thinking of something to write here |
||
Top | |
Smackdown |
|
|||
|
Don't worry, either way, I doubt you'd be able to adapt the BF/BA ecu to a previous SOHC falcon. Meaning good luck doing the transmission IF it needs that ecu to give it info.
Get my drift. Of course, this is if you have an infinite amount of money!
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
Top | |
Smackdown |
|
|||
|
Don't worry, either way, I doubt you'd be able to adapt the BF/BA ecu to a previous SOHC falcon. Meaning good luck doing the transmission IF it needs that ecu to give it info.
Get my drift. Of course, this is if you have an infinite amount of money!
_________________ BA Falcon Futura on EGas. Stock as...
|
|||
Top | |
mreb |
|
|||
|
the bf has got duel cam timing as well where the ba only had the single vct so even more of a pain ,isnt the stud pattern the same on the back of the engine or did it change
|
|||
Top | |
Aposta87 |
|
||
Age: 37 Posts: 337 Joined: 23rd Feb 2005 Ride: BA XTS, BF Xr6 Turbo Ute Location: Brisbane |
opto wrote: I think you will find they are 6 speed manuals, somebody correctm e if I'm wrong.
Nah the BF has 6 speed auto. Sounds very enticing if you are an auto fan!
_________________ Ford Fan: Since 1987 - Born a Blue Oval Supporter! |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 69 guests |