Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

ac belt on a ed 

 

Page 1 of 1 [ 4 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
copbait
 Post subject: ac belt on a ed
Posted: Tue May 04, 2010 10:54 pm 
Oompa Loompa
Offline

Age: 41

Posts: 41

Joined: 23rd Jan 2009

Ride: ed fairmont

Location: beaconsfield
TAS, Australia
never done a ac belt just wanna know what i have to undo and take off to do this job
Top
 Profile  
 
 
89.SVO
 Post subject: Re: ac belt on a ed
Posted: Tue May 04, 2010 10:58 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3382

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia
undo fan shroud and clutch fan (assuming it's still there). the clutch fan is reverse thread. loosen 24mm nut on P-steer pulley and remove belt. loosen 13mm lock nut on alternator and remove belt. loosen 24mm lock nut on AC belt.

when tightening the belts there should be about 10mm deflection. if it's kept this way it should help to stop that annoying cold start up belt squeal the early E-series had.

hope i've helped

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph
Top
 Profile  
 
 
copbait
 Post subject: Re: ac belt on a ed
Posted: Tue May 04, 2010 11:03 pm 
Oompa Loompa
Offline

Age: 41

Posts: 41

Joined: 23rd Jan 2009

Ride: ed fairmont

Location: beaconsfield
TAS, Australia
sweet thanks ill let ya know tomorrow iv done heaps off fan/power stirring belts and would the belt work around the fan like the other belts do
Top
 Profile  
 
 
89.SVO
 Post subject: Re: ac belt on a ed
Posted: Tue May 04, 2010 11:07 pm 
Getting Side Ways
Offline
User avatar

Age: 35

Posts: 3382

Joined: 11th Mar 2008

Ride: EA SVO, AU2, Toyota Crown

Location: Bendigo
VIC, Australia
i just take the fan off. easier. get's it out of the way. i ended up buying the right sized spanner. before hand i was using a shifter and a screw driver to stop it spinning lol

 

_________________

Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw.
Weekend car: AU2 "XR8" 220kw 5L 5 speed. 19" BBS LM . Full exhaust. Lowered on Kings and Koni's. 13.8@97mph
Fast car: EA SVO AU motor. Built BTR. SDE 3500 stall. 76mm turbo. On E85. approx 425rwkw. 10.8@126mph
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 4 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: No registered users and 56 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Nov 27, 2024 7:14 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names