|
| Steady ED |
|
|||
|
Black rocker covers are the way to go, f**k that tickford red s**t
Getting there man!
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| kut&shutkustomz |
|
||
|
madmax wrote: kut&shutkustomz wrote: is it ef ... could be ea ..? thats the only thing i could think of mate . if its the wrong 1 it will leak .. dave .. p.s. glad we could help out today ..  Not an EA gasket, they were a flat seal with two half moon blocks for the cover ends. thanx for that , .. looking great there adam ..i like the blk too. dave ..
_________________
|
||
| Top | |
||
| Leroy |
|
||
|
of course its not an EA gasket, i gave it to him
sorry i couldnt help you out the other day, i went away for the weekend and ended up staying a little longer than planned. hope it is all working out, should almost be on the road by now. Let me know if there is anything else i can get for you or help with.
_________________ Now driving a Hilux |
||
| Top | |
||
| Rick_Deckard |
|
|||
|
That's okay Leroy. I was actually trying to reach you to make sure you didn't get any more parts for me, lol, as I picked up the rest myself from a few places. Cheers.
_________________ E39 523i |
|||
| Top | |
|||
| snap0964 |
|
|||
|
I used a smear of RTV blue on the rocker cover in the 'loose' areas - when it slightly set it held the gasket on perfectly, particularly around the rear area.
XR6 EF wrote: have fun with the back most bolts on the inlet oh i had fun with those!lol. A custom ring spanner with a dogleg makes this p*ss easy - particularly on EL's because they have the square engine harness connector bracket sitting between inlet branches 4 & 5 - just to add to the fun.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Rick_Deckard |
|
|||
|
Lads, is it an issue if a exhaust bolt refuses to go into the head? Just one bolt, bottom row, 3rd from the left.
_________________ E39 523i |
|||
| Top | |
|||
| kut&shutkustomz |
|
||
|
would be good if you can get it in ..
wak some wd40 on it ,see if that helps it .
_________________
|
||
| Top | |
||
| madmax |
|
|||
|
Till_Lind wrote: Lads, is it an issue if a exhaust bolt refuses to go into the head? Just one bolt, bottom row, 3rd from the left.
It may cause a small exhaust leak. Be careful trying to do them up, remember you are only threading into an alloy head. Best way is to do them all up by hand only then tighten them evenly.
_________________
|
|||
| Top | |
|||
| fordzatmyplace |
|
||
|
Till_Lind wrote: Lads, is it an issue if a exhaust bolt refuses to go into the head? Just one bolt, bottom row, 3rd from the left.
it will cause a small exhaust leak. I remember when i took the heat shield off my exhaust for the first time and ran it missing the two bolts, it made a noticable effect on idle quality.
_________________ ^^^ What He Said
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 70 guests |
