|
efLIAM |
|
||
|
okay so about 5 months ago i put in a new engine, because i blew the head gasket in mine the engine i put in had only done 90 000 so really good buy for $200 put it all in sweet as. about a week later this tapping noise starts sounds like it might be the flex plate but didnt look into it any more some guy said it was my 6th cyl but it didnt get any worse so that takes that out. lol thats my first problem not a bigy as its not effecting power or performance so im not really bothered. the second promblem last thursday night i was running a little low on full not dead low but the fuel light was on, so just before i get to the servo the car starts spluttering and spitting so i get to the servo fill it up and think that all my problems are over. i start the car and its still doing it , so the next day i change oil, spark plugs, leads coil pack, does nothing so then i put in new injectors and computer still nothing, get my hands on a crank angle sencer and a cam angel sence replace both still nothing compression test it all sweet. so know when i start my car its still doing the same thing just not as bad lol.
please some one help me ps thanks if you read all that sorry about grammer and spelling im in a little bit of a rush cheers |
||
Top | |
PIMP_LTD |
|
||
|
Not sure if you said it in that rather large sentence, but have you checked your fuel pump?
_________________ Commodore australia's favorite car??? What a load of s**t |
||
Top | |
GTO13F |
|
||
|
not a noisy lifter?
_________________ EF futura in the build.
|
||
Top | |
efLIAM |
|
||
|
yep had the fuel pump replaced about a months ago soi highly doubt it could be that
GTO13F- na i checked out the lifters today and everything looks in tip top condition |
||
Top | |
GTO13F |
|
||
|
so no change in noise with engine revs 100% its internal noise?
_________________ EF futura in the build.
|
||
Top | |
PIMP_LTD |
|
||
|
Have you recently mistreated it? as in prolonged high revving etc?
After changing all that s**t, i'd be suspect of a cracked piston or ring land. Have had this s**t happen in other motors.
_________________ Commodore australia's favorite car??? What a load of s**t |
||
Top | |
efLIAM |
|
||
|
na the tapping just gets faster as the engine revs increase lol its not really worrying me as its not getting any worse, lol its just there but the whole engine running like 60year old s*** is whats worrying me lol.
|
||
Top | |
efLIAM |
|
||
|
but if cracked piston or ring wouldnt it loss compression? in the compression test all cyl were at about 140psi just off the top of my head. i know they were all with in about 8 psi of each other
|
||
Top | |
GTO13F |
|
||
|
im thinking either harmonic balancer or bigend bearings going.
_________________ EF futura in the build.
|
||
Top | |
PIMP_LTD |
|
||
|
Most of the time yes, but the last engine i built was due to a cracked ring land. It too still had alright compression.
The ticking could be a few things, do you have an oil pressure gauge?
_________________ Commodore australia's favorite car??? What a load of s**t |
||
Top | |
efLIAM |
|
||
|
yeah a mechanic mate of mine said bigend bearing lol i realy dont like the sounds of that lol dont have the money or time to be doing big work like that to it
|
||
Top | |
efLIAM |
|
||
|
na dont have an oil pressure gauge. im pretty sure i have had enough of trying to fix it from friday night till about 2 hours ago and 2 slabs of rum later im over it i rekon i will just take it to the mechanic tomorrow and see what he says
|
||
Top | |
GTO13F |
|
||
|
not a massive job bit costly if u gotta pay some 1 2 do it....probli easier and quicker 2 throw in a reco'd motor
_________________ EF futura in the build.
|
||
Top | |
efLIAM |
|
||
|
true but if it was the bearing wouldnt it of completly gone by 6 months of driving and would i notice any power lose or anything
|
||
Top | |
GTO13F |
|
||
|
all depends idov commodore with fukd out bearings 4 alil under a yr b4 it completly destroyed the engine
and yer their'd b a considerable about of power loss...
_________________ EF futura in the build.
|
||
Top | |
Who is online |
---|
Users browsing this forum: Google Adsense [Bot] and 138 guests |