|
| lil_lincoln |
|
|||
|
pretty much guy after a cam to suit these mods below (in sig) umi really dont no much about cams, i no they open and shut valves and duration of the lift ect car has a stock head stock valve springs only bolt on stuff has been done. prefer not to use shims. what would i be looking at?? or would it be better going a flash tune and 3.45 lsd??
_________________ |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
lil_lincoln wrote: pretty much guy after a cam to suit these mods below (in sig)
i see an exhaust system, and some audio gear. Your car is near stock, do you plan on modding it any further as that can have a bearing on what cam/s to use But in all honesty, your post shows you havnt researched a single thing. This forum has 2 active sponsors who do cams for your car, and have many pages in their forums, also the search function will give you 50 pages of info to read about. A google search will help you understand cam basics as well. Example: http://www.cranecams.com/?show=faq&id=2 If your still stuck after that, then i will happily give you more info 
|
||
| Top | |
||
| biggav |
|
|||
|
amen
IIRC there is a damn sticky at top of this thread about cams how trying there also.
_________________ 4.0lt Balanced Bottom End, ACL Race Internals, Rspec4 Cam, BPT Swichchip, PH4480, 2.5' Lukey, Scorcher Bodykit, T5 Manual frd906 wrote: LOLLOLLOLLOLOLLOLLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOL
|
|||
| Top | |
|||
| lil_lincoln |
|
|||
|
yup your spot on, i no that stuff u sent me the link on. car is pretty much stock as you said. and i wont lie ive done no research. but cant u just answer my question?
_________________ |
|||
| Top | |
|||
| biggav |
|
|||
|
umm refer to the sticky at top of thread mate cant be that hard to have look around.
_________________ 4.0lt Balanced Bottom End, ACL Race Internals, Rspec4 Cam, BPT Swichchip, PH4480, 2.5' Lukey, Scorcher Bodykit, T5 Manual frd906 wrote: LOLLOLLOLLOLOLLOLLOLLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOLOL
|
|||
| Top | |
|||
| Steady ED |
|
|||
|
Have a look at stockstandards thread at the top of these forum regarding frequently asked questions.
If you had bothered to read that, you would know that asking "what cam is good for me" is useless.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| lil_lincoln |
|
|||
|
ok ok ive done a little research and come back with this.
Wade 1673 Crow 2222519 or is it better if i were to go for the wade1636.
_________________ |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
For a stock auto falcon with exhaust mods..... well in my opinion anyway
auto with 3.45 diff ratio or lower = 1636 auto with 3.73 diff ratio or higher = 1673 |
||
| Top | |
||
| GeZza200 |
|
||
|
im about to try the AU version of the 1673 with my auto, il tell you how it goes in a few weeks
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| lil_lincoln |
|
|||
|
ah gezza awesome will like to no how you go, just been doing some thread mining. http://www.fordmods.com/forums/viewtopi ... =1636c977b
_________________ |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 79 guests |
