|
| Waggin |
|
|||
|
It was a a common known problem with the earlier E series 4L engines that the front of the engine runs too cold due to bearing nearer the thermostat housing, plus the typical cooler conditions at the front of the engine bay. Interesting to see how they worked around it
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build] |
|||
| Top | |
|||
| 4.9 EF Futura |
|
|||
|
Is it wise to block water passages with a gasket? I mean - im not questioning Ford, ACL, mechanics from this thread...
It just seems that you have water moving through the jacket and coming up against a gasket... surely its going to try and work its way past the gasket eventually... ?? Or are we talking extremely low pressure ??
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| Andrew J |
|
|||
|
its not that great a pressure, and besides, it has other places it can run. The rest of the gallerys SHOULD be sufficient, but ive never had anything to do with this sort of thing
_________________ The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
|
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
4.9 EF Futura wrote: Is it wise to block water passages with a gasket? I mean - im not questioning Ford, ACL, mechanics from this thread...
It just seems that you have water moving through the jacket and coming up against a gasket... surely its going to try and work its way past the gasket eventually... ?? Or are we talking extremely low pressure ?? they have been doing it for years with out any problems.. besides imagine the pressure the gasket is under when the head bolts are torqued down!!! if you can try to have a look at a stripped down engine and i think you will understand it a bit better Last edited by tickford_6 on Thu Jul 07, 2005 12:41 am, edited 1 time in total. |
||
| Top | |
||
| kodak |
|
||
|
if your comparing pressure in the water passages to those in the combustion chamber during compession and ignition cycles than yes, the pressure is much lower.
|
||
| Top | |
||
| tickford_EB |
|
|||
|
sorry about the hijack, but can anybody tell us if a EF/EL head would fit EA-ED blocks? I used to know this s**t, to many beers latley me thinks.
_________________ '92 XR6 (Flame Red)
|
|||
| Top | |
|||
| voxace |
|
|||
|
Yep, surely will.
|
|||
| Top | |
|||
| tickford_EB |
|
|||
|
thanks for the quick reply champ
_________________ '92 XR6 (Flame Red)
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 79 guests |
