|
| Falcon96XR6 |
|
|||
|
Hi everyone, sorry if this is in the incorrect forum
Putting an au1 engine into my EL, I have a very simple question, that I cannot find an answer to anywhere, When bolting a EL T5 to the AU block, do I use the AU Sandwich plate? Or the EL Sandwich plate? Cheers, Tait
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| TROYMAN |
|
||
|
What bellhousing are you using?
are you aware of the bolt patturn differences from e series to au? either way you can still use e series bellhousing. when I put au engine in my ed I used the au sandwitch plate. |
||
| Top | |
||
| SWC |
|
||
|
Use the AU sandwich plate for either the E series bellousing or the AU bellhousing.
|
||
| Top | |
||
| Mad2 |
|
|||
|
when i finally put the AU engine in, i will be using the AU plate & AU bellhousing [only coz i want bolts allround - the guys that have already answered have used the e series bellhousing on the au without hassles]
|
|||
| Top | |
|||
| Falcon96XR6 |
|
|||
|
{USERNAME} wrote: What bellhousing are you using? are you aware of the bolt patturn differences from e series to au? either way you can still use e series bellhousing. when I put au engine in my ed I used the au sandwitch plate. Im using E series Bellhousing, So I should use the AU Samdwich plate? I'm aware it's missing a few bolts but your ED punched 250rwkw and was fine wasn't it?
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| SWC |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: What bellhousing are you using? are you aware of the bolt patturn differences from e series to au? either way you can still use e series bellhousing. when I put au engine in my ed I used the au sandwitch plate. Im using E series Bellhousing, So I should use the AU Samdwich plate? I'm aware it's missing a few bolts but your ED punched 250rwkw and was fine wasn't it? Yes use AU Sandwich plate. It will be fine. Has been done many times with both manual and auto. |
||
| Top | |
||
| Falcon96XR6 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: What bellhousing are you using? are you aware of the bolt patturn differences from e series to au? either way you can still use e series bellhousing. when I put au engine in my ed I used the au sandwitch plate. Im using E series Bellhousing, So I should use the AU Samdwich plate? I'm aware it's missing a few bolts but your ED punched 250rwkw and was fine wasn't it? Yes use AU Sandwich plate. It will be fine. Has been done many times with both manual and auto. Okay thank you SWC, only thing left is to find someone that can cut and weld my sump.. No one down here seems to be interested..
_________________ EL XR6, T5 Speed - Full Factory Fitted Tickford Body Kit, AU Engine, Billet Camtech 845 Cam, J3 Chip, MLS Gasket, Intake, Extractors, High flow cat, 2 1/2in exhaust, K&N Air Filter, 3.45 LSD, - My Pride and Joy |
|||
| Top | |
|||
| SWC |
|
||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: What bellhousing are you using? are you aware of the bolt patturn differences from e series to au? either way you can still use e series bellhousing. when I put au engine in my ed I used the au sandwitch plate. Im using E series Bellhousing, So I should use the AU Samdwich plate? I'm aware it's missing a few bolts but your ED punched 250rwkw and was fine wasn't it? Yes use AU Sandwich plate. It will be fine. Has been done many times with both manual and auto. Okay thank you SWC, only thing left is to find someone that can cut and weld my sump.. No one down here seems to be interested.. Contact DA22LE on here, he may be interested in doing it. |
||
| Top | |
||
| condortkg |
|
||
|
hows your project going im about to start one for my car in afew weeks hopefully before christmas you got any pics?
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 41 guests |
