|
| Grimketel |
|
|||
|
I see. will be investigating a 12 month working visa to the UK so I may have to shelve my plans of doing up the AU any further which is a shame, but i will still watch this space very closely incase I do end up camming it...
_________________ enough isn't enough |
|||
| Top | |
|||
| GeZza200 |
|
||
|
I picked up the cam yesterday, i will book it in next week to get the cam in. I'm just wondering how the ECU will cope with it. Because i will be getting the unichip a little bit later on now.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| edfairmont4.0 |
|
|||
|
Hey dude good work with the new engine lol i wish my rebuild was free! lol $2000 later......
and by the looks of that cam spec the computer SHOULD handle it no worries at all. you just might need a bit more juice up top...
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
| Top | |
|||
| GeZza200 |
|
||
|
cheers, so it will lean out up at the top end?? will the unichip be able to fix that or will i need new injectors?
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
it will be fine
|
||
| Top | |
||
| edfairmont4.0 |
|
|||
|
IF it needed more juice the uni chip should be able to fix no worries, i dont think it would need more though.
If it was VERY lean you would need injectors.
_________________ ED Fairmont, Ghia mock DOHC-T 11.6 @ 118 Trying to get back to the 1/4! |
|||
| Top | |
|||
| GeZza200 |
|
||
|
FordFairmont wrote: it will be fine
Gday, you went from a 1636 to a 1673 didn't you or was it 1636 to 977B. Was there much difference? Cheers
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
yep 1636 to 977b
The 977b made the most power in mine so far. I went with a larger Wade cam and made slightly less power & torque. Because yours is auto though, for a top end cam to work well, you would need shorter diff gears |
||
| Top | |
||
| GeZza200 |
|
||
|
ok, with the 1671 spec sheet on the other page is there much difference between that and the 977B? I will be getting different gears. But i might need a different housing by the looks of it.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
the 1671 specs seem to be closer to the e-series 1673 cam.
I tried using that "cam cat" program to see whats available for the AU and it confused the f**k out of me. |
||
| Top | |
||
| GeZza200 |
|
||
|
Yeah its not the easiest thing to use. I dont think it's up to date aswell. Im just wondering if i should get the same person to put my cam in, because he blew my engine before lol
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
yeah i dunno how he f**k it last time, the cam only goes on one way onto the cam gear because of the keyway.
Simple as keeping tension onto the chain and removing the bolt on the cam gear sprocket and swapping cams over. Also fitting shims into the rocker arms if its a regrind..... I'd be spending money on diff ratio change next if i were you |
||
| Top | |
||
| GeZza200 |
|
||
|
yea i will. my diff is a locker atm so it needs to be fixed. skips arond corners and tyres are wearing so quick
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Grimketel |
|
|||
|
GeZza200 wrote: ok, with the 1671 spec sheet on the other page is there much difference between that and the 977B? I will be getting different gears. But i might need a different housing by the looks of it.
as long as you get the gears from an r31 the gears will fit fine. had no probs fitting em in the au. good luck finding 3.7's from the r31 manual though, you will find pintara 4.11's everywhere, best bet is 3.89 from the r31 auto.
_________________ enough isn't enough |
|||
| Top | |
|||
| GeZza200 |
|
||
|
I have found 3.7's are they a good choice for the auto
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 54 guests |
