|
| martyel |
|
||
|
i just finished getting the head off my falcon (major pain in the a**e) i went out and bought an au series 2 head complete with valves cam etc. my question is: there is a plug on the rear of the au head but the head that i took off didnt have it, what is this plug for? im also puzzled by the fact that my block has no number that is visible i.e number isnt where it should be. the haed that was on it had 94 AB printed on the front which to me says its from an ef is this true? dying without my car have been driving around in girlfriends car and its too slow, so im kinda in a hurry to get it all back together. any help is greatly appreciated thank you
|
||
| Top | |
||
| stockstandard |
|
|||
|
AU head will go on fine. Just use the rocker gear and cam that came with it.
94AB is an EF head (also fitted to late ED's)
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
that plug is for the knock sensor iirc
your car not equiped with 1 so no need to worry about it do what stockstandard said and it be sweet as!
_________________ RIP SCOTT |
|||
| Top | |
|||
| twase |
|
|||
|
martyel wrote: i just finished getting the head off my falcon (major pain in the a**e) i went out and bought an au series 2 head complete with valves cam etc. my question is: there is a plug on the rear of the au head but the head that i took off didnt have it, what is this plug for? im also puzzled by the fact that my block has no number that is visible i.e number isnt where it should be. the haed that was on it had 94 AB printed on the front which to me says its from an ef is this true? dying without my car have been driving around in girlfriends car and its too slow, so im kinda in a hurry to get it all back together. any help is greatly appreciated thank you That would be for the Coolant sensor. You can add one there and rewire yours from the thermostat position and get a much more reliable temp reading.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| nannas_ed |
|
|||
|
dont you have to use au running gear, feul rail and injectors on earlier e-series when running an au head :S
_________________
|
|||
| Top | |
|||
| stockstandard |
|
|||
|
Quote: That would be for the Coolant sensor. You can add one there and rewire yours from the thermostat position and get a much more reliable temp reading. So running a sensor in the thermostat housing isnt reliable? nannas_ed wrote: dont you have to use au running gear, feul rail and injectors on earlier e-series when running an au head :S
no
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| twase |
|
|||
|
stockstandard wrote: Quote: That would be for the Coolant sensor. You can add one there and rewire yours from the thermostat position and get a much more reliable temp reading. So running a sensor in the thermostat housing isnt reliable? I should have used the words "more accurate indication of temperature " rather than reliable.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| stockstandard |
|
|||
|
twason wrote: stockstandard wrote: Quote: That would be for the Coolant sensor. You can add one there and rewire yours from the thermostat position and get a much more reliable temp reading. So running a sensor in the thermostat housing isnt reliable? I should have used the words "more accurate indication of temperature " rather than reliable. The sensore themselves are only accurate to within 15% of the actual temperature. Really dont think it matters where you put it.
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| stevegt |
|
||
|
Think you will find that the sensor was placed on the head at the rear on the AU ,was so it can measure head temp as it is able to run the car with total fulid loss. It cant measure temp if its on the thermo housing.
|
||
| Top | |
||
| martyel |
|
||
|
cool thanks everyone for your input, hopefully i should have my car back on the road by next weekend
|
||
| Top | |
||
| wicksy |
|
|||
|
Ant frm alted was going to sell my a AU head for my ED but there wasnt much more benefit and its harder to get cams for, so i got the late ED early EF head on mine
_________________ Now i have a EF XR8 5spd.........mmmmmm 5L |
|||
| Top | |
|||
| jonbays |
|
||
|
twason wrote: martyel wrote: i just finished getting the head off my falcon (major pain in the a**e) i went out and bought an au series 2 head complete with valves cam etc. my question is: there is a plug on the rear of the au head but the head that i took off didnt have it, what is this plug for? im also puzzled by the fact that my block has no number that is visible i.e number isnt where it should be. the haed that was on it had 94 AB printed on the front which to me says its from an ef is this true? dying without my car have been driving around in girlfriends car and its too slow, so im kinda in a hurry to get it all back together. any help is greatly appreciated thank you That would be for the Coolant sensor. You can add one there and rewire yours from the thermostat position and get a much more reliable temp reading.Correct coolant sensor. and AU heads have WR2A cast onnthe front |
||
| Top | |
||
| martyel |
|
||
|
i still dont understand why my engine would have no number on it? i am sending the car to my mechanics on the weekend to get fixed once and for all, because i broke the timing chain guide and have to take the engine out to do that i think
 is 200 dollars a fair price for the work involved
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 85 guests |
