|
| medalforces |
|
||
|
hey guys i just need to find out some info iv read this how 2 about 10 times and still cant work out some things
documents.php?d=85 OK it says i can use the El ECU and Manifold and Arcon pump and stuff but so i have to use it can i use the AU stuff and 2nd it doesn't give me any info on the Fan side of things I'm going to help my mate do this to his EB and we have a AU to pick as much as we need off it so we can do this thanks for the help |
||
| Top | |
||
| ED_XR6_5 SPEED |
|
|||
|
i have done this into a mates ef, basically you could use all the accessories off either an ef/l or au, just remember that you need to use the ef/l bbm cos the au ones are different.
medalforces wrote: and 2nd it doesn't give me any info on the Fan side of things for the fan info just get some wiring diagrams and run some new wires for them, just become a member of australian ford forums and download some diagrams from there. cheers, Tomo
_________________ 98%of city drivers will say ''holly s**t'' befor going into a ditch in a snowstorm and 98%of country drivers will say ''hold my beer and watch this'' |
|||
| Top | |
|||
| TROYMAN |
|
||
|
the doco is alittle out of date..lol
but yes you can use the au alternator (may need to change the plug) ,aircon compressor ect. but if your wanting to use au aircon compressor custom hoses will need to be made up.. the reason for using the el ecu is it plugs into the eb loom and has the outputs for the bbm and the output for thermo fans.. you just need to add the wires to the ecu for the bbm and thermo control.... or you can use an aftermarket thermal switch to trigger the fans... 99% of the info is in the doco |
||
| Top | |
||
| medalforces |
|
||
|
cool thanks so i have to get a BEM and ECU form a EL /EF can i use the AU manifold
|
||
| Top | |
||
| TROYMAN |
|
||
|
dont need el bcm (is it a series2 eb with smartlock??) just need ecu from el as ef is different and wont fit..
and you need an ef or el manifold as the au manifold has a tmap sensor in the manifold and is not compatable with the el ecu and the el ait sensor doesnot fit into the au manifold.. |
||
| Top | |
||
| medalforces |
|
||
|
yeah its a EB S2 with Smartlock
|
||
| Top | |
||
| TROYMAN |
|
||
|
medalforces wrote: yeah its a EB S2 with Smartlock in that case you can plug an el ecu directly into your loom and the car will start and run.. for the bbm and thermo fans to operate a couple of pins and wires need to be added to the eb plug.. |
||
| Top | |
||
| medalforces |
|
||
|
cool thats But WHAt is A BBM and where it it located
ok so let me get this down I need a EL ECU EF/EL Manafold AU Block Au Fans Au Airbox and Pipeing EB Spark plug leads and other stuff ok i would like to run as much of the AU stuff as i can AU Compressor AU Power Stering Pump/Resavor AU Altanator |
||
| Top | |
||
| ED_XR6_5 SPEED |
|
|||
|
medalforces wrote: cool thats But WHAt is A BBM and where it it located the BBM is the intake manifold 
_________________ 98%of city drivers will say ''holly s**t'' befor going into a ditch in a snowstorm and 98%of country drivers will say ''hold my beer and watch this'' |
|||
| Top | |
|||
| medalforces |
|
||
|
oh duh lol dumb Moment lol
|
||
| Top | |
||
| TROYMAN |
|
||
|
medalforces wrote: cool thats But WHAt is A BBM and where it it located ok so let me get this down I need a EL ECU EF/EL Manifold AU Block Au Fans Au Airbox and Pipeing EB Spark plug leads and other stuff ok i would like to run as much of the AU stuff as i can AU Compressor AU Power Stering Pump/Resavor AU Altanator the bbm is the manifold, (broad band manifold) you need the au engine. au or ef/el power steering pump.(they are the same anyway) ef/el manifold and throttle body. el ecu. ef/el bbm vac solinoid. ef/el accelerator pedal and cable. you can use au intake piping and airbox. ef/el radiator. and hoses and heater hoses. ef/el thermofans you use your eb lower thermostat housing as its got the water sensors for the ecu.. you can use a ef/el aircon compressor, this way the eb aircon lines will bolt to the ef/el pump. if you use an au arcon pump you will need custom lines.(au aircon pumps are s**t imo) |
||
| Top | |
||
| ED_XR6_5 SPEED |
|
|||
|
haha dont worry, i have had heaps over the last couple of weeks
_________________ 98%of city drivers will say ''holly s**t'' befor going into a ditch in a snowstorm and 98%of country drivers will say ''hold my beer and watch this'' |
|||
| Top | |
|||
| medalforces |
|
||
|
Okay, cheers for that, is there anything else we need to know, or need to get?
(this is the guy with the EB S2 btw.) |
||
| Top | |
||
| SWC |
|
||
|
EF Fans and EL are different, make sure you use EL fans (2 plugs, EF have 3 plugs) with the EL ECU. You will also need the Dizzy from your EB, remove the gear from the Oil Pump dive and fit to your Dizzy, that way the gear will match the Aux shaft.
|
||
| Top | |
||
| medalforces |
|
||
|
Am I able to use the AU Thermofans?
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 26 guests |
