|
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
Did my AUII's first oil change and whilst i havnt had a chance to grab myself a workshop manual, i did trawl the forums and came up with 5.5 litres inc oil filter for 6cyl's
Well, i warmed the car up, drained the oil for about 40mins, then topped it up and its right on the Full mark, but it only took 4.8 litres  The car is on level ground, have given it plenty time to settle, engine is warm..... yes i know oil expands with heat, but it shouldnt expand by that much? Im not too concerned as my EF always took just under 5 litres, but im wondering why does everyone say 5.5 litres when its not anywhere near that |
||
| Top | |
||
| EFFalcon |
|
|||
|
oil filter.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| TROYMAN |
|
||
|
I always end up having to put 5.2 litres of oil in my vct engine, this includes a new filter..
|
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
EFFalcon wrote: oil filter. i forgot to mention, but yes i ran the car for 5 mins to run the oil through the new oil filter then waited for 1/2 hour to settle, but it took 4.8 litres all up in total |
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
Well if its showing its full just leave it then. check it again tomorrow. you dont wanna overfill it either.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| 4LEDboy |
|
|||
|
My HP motor with a new filter took exactly 5L, dead on the full mark on the dipstick.
_________________ Adelaide Motorplex < Click on it! You know you want too! Quote: Thats not the point *a**hole
|
|||
| Top | |
|||
| naughtyfalcon |
|
|||
|
we've had the ea for 7 years and never have i ever put the recommended amount of oil in it, always less.
our pajero is suppose to take 6 litres of oil, it never has , even with a new filter.
_________________
|
|||
| Top | |
|||
| paul09 |
|
||
|
I did mine the other day in an eb2 4L, guy at autobarn said 'hmm it says here it should take 6L but my falcon only ever needed around 5'
Mine took about 4.7L and is like 2mm below full on the dipstick after 2 days of driving, I let it drain for over an hour too so most of the old stuff should have been gone Works well cos now I have 300mL spare for topping it up if need be
_________________ 1: Mum's car: ED XR6 wagon.zorst,stereo |
||
| Top | |
||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
4LEDboy wrote: My HP motor with a new filter took exactly 5L, dead on the full mark on the dipstick. well, im a f**k idiot i just remembered that i emptied the remaining contents from a spare bottle in first so i had somewhere to put the dirty oil so the final figure couldve been 5L or 5.2L...... i dont have a f**k clue. I guess in 6 months when i do the next oil change i will know for sure 
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 64 guests |
