|
| djcustomcomputing |
|
|||
|
Hi
i was wondering what would be best. the kit i was thinking of getting is the same kit exept for my model as whats in my dads ba gt. its an ss inductions kit complete with K&N pod filter and housing and a snorkel that is longer than the radiator. the only problem is i can only find it a auto barn and they want $700 which is more than my dads. does anyone know of any other kits or somewhere to buy them im in SA but i will pay for postage.
_________________ MY BUILD THREAD Last edited by djcustomcomputing on Sat May 24, 2008 7:29 pm, edited 1 time in total. |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
are u talkign about forced induction or cold air?
these are 2 totally different things to me it sounds like u are after a cold air induction setup most guys with the AU's put on the tickford snorkel which is larger than stock and add the K+N filter
_________________ RIP SCOTT |
|||
| Top | |
|||
| james88 |
|
|||
|
mine was the aunger one from ebay just over 200 i think. and yea forced induction is a turbo or supercharger you just want a cold air intake
_________________ there are a few falcons in my drive way, some of them are turbo charged and some arent, some have big engines and some are small but they all have one thing in common and that is the blue oval on the front |
|||
| Top | |
|||
| djcustomcomputing |
|
|||
|
sorry about the mistake in the heading i wasnt thinking and yes i do know the difference.
i was hoping to find a kit with the pod filter and snorkel the size of the radiator. does anyone knoe where i can get one other than auto barn thanks for the help so far
_________________ MY BUILD THREAD |
|||
| Top | |
|||
| james88 |
|
|||
|
im pretty sure they dont make the radiator legth ones for au cause there isn't enough bonet clearance. i have seen them ba's but not au's
_________________ there are a few falcons in my drive way, some of them are turbo charged and some arent, some have big engines and some are small but they all have one thing in common and that is the blue oval on the front |
|||
| Top | |
|||
| Private9 |
|
|||
|
This is what I did with mine:
More details in link below http://www.fordforums.com.au/showthread.php?t=11218577 |
|||
| Top | |
|||
| Joesau |
|
||
|
since you have xr lights, like me, you can fit a 3inch silicone pipe straight from the bottom off the airbox to the front bar. works a treat especially doing 60km's + air gets rammed in, i just put a pod on the other day and the car is going good. You can squeeze the pipe through and passd the back off the lighting assembly and then where you please to have it, get a 1metre length from autobarn $25, then a plastic gutter joiner $5,. i also have the bigger tickford snorkel well worth mod for 30 buks can notice the difference straight away.
|
||
| Top | |
||
| Sloxr6 |
|
|||
Age: 40 Posts: 862 Joined: 8th May 2005 Ride: BA Wagon Turbo, Ba Fairlane G220 Location: Colac |
Hi there are a few on ebay, link
http://cgi.ebay.com.au/Ford-Falcon-AU-XR6-XR8-SS-Inductions-Pack-Cold-Air_W0QQitemZ220238304123QQihZ012QQcategoryZ36680QQssPageNameZWDVWQQrdZ1QQcmdZViewItem or you can just get the scoop its about half price http://cgi.ebay.com.au/Ford-AU-XR6-XR8-Cold-Air-Intake-SS-Inductions_W0QQitemZ220238298367QQihZ012QQcategoryZ36680QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Hope this helps 
_________________ Congo Green Ba Wagon With F6 6 Speed Manual Driveline. |
|||
| Top | |
|||
| djcustomcomputing |
|
|||
|
thanks for the advice the guys at autobarn said thay could get it. personally i didnt believe them and i guess i was right.
thanks again
_________________ MY BUILD THREAD |
|||
| Top | |
|||
| GeZza200 |
|
||||
|
I wouldn't bother getting a pod (well if you want the noise then yea) I have mine setup like this. Also the SS induction kit isn't worth the money, get somthing like an XR6T snorkle or an Aunger one.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||||
| Top | |
||||
| djcustomcomputing |
|
|||
|
truth is and it souns stupid but i like the noise a pod makes but if i get a pod it think ill get 3" tube from intake to it plus run 3" flexi tube down past the headlight and ill make up a little scoop and mount it down the bottom cutting off a little of the rad intake.
what do u think???
_________________ MY BUILD THREAD |
|||
| Top | |
|||
| GeZza200 |
|
||
|
Might be better having the same setup as mine but have a pod in the box and also cut a whole in the box, down the bottom and have another intake comming out from there. Instead of having one big pipe going from the throttle body to underneith your headlight.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 143 guests |
