|
| Molloy |
|
|||
|
Hey lads picked up a stock EF cam today that im gonna send off the get a regrind, been looking at the alted stage 1, anyone else know off a good cam i could put in a auto without stuffing around with stall converters?
thanks gents.
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| WagonDad |
|
|||
|
G'day Molloy, Just fitted a modified Stage 1 RPD/Alted cam to the auto EF wagon. The cam makes good power through the rev range, while there's no need for a stall convertor, if you did fit one with this cam it would just make it better. Low end power 0 - 2500 rpm is improved over standard not big heaps but you can feel it. From 2500 rpm to 4000rpm it builds nicely definately starts to set you back in your seat. 4000 rpm is where things really start to happen, excellent pull right up until the auto changes to the next gear. Unfortunately the new power is making my auto slip, nothing a service and full fluid flush wouldn't fix, but im going to get some mods done to the auto for better performance.
_________________ 4.0L EF Fairmont Station Wagon. EL GT Snorkel. K&N Pod in air box. 3" Intake piping.
|
|||
| Top | |
|||
| hornet |
|
|||
|
Alted stage 2 is auto friendly too
Why not go a step further I went the whole hog and got an RPD/Alted Stage 3. But i'm blessed with a 5 speed.
_________________ 5 Speed EL Futura
|
|||
| Top | |
|||
| Rapier |
|
||
|
hornet wrote: Alted stage 2 is auto friendly too
Why not go a step further I went the whole hog and got an RPD/Alted Stage 3. But i'm blessed with a 5 speed. sorry to hi jack but just out of intrest hornet how does that run on the stock ecu, or did you buy a tickford ecu to run it |
||
| Top | |
||
| Molloy |
|
|||
|
hornet wrote: Alted stage 2 is auto friendly too is the stage 2 out? awsomw Why not go a step further I went the whole hog and got an RPD/Alted Stage 3. But i'm blessed with a 5 speed. 
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| twr7cx |
|
|||
|
It's always good to have a chat to a few of the companies doing it, being a regrind, Alted and Wade are probably the best to have a yarn to to start with! They've both been doing it for a while and done some research and should be able to help you out!
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 72 guests |
