|
| Germeinguy |
|
||
|
Recently i removed the engine and trans from my eb which ran well and fitted it in to a 1990 ea, both were 4 speed autos.
My problem is that the transmission will now not change into fourth.Everything else seems to be fine. Has anybody any suggestions as i have ran out of ideas, thanx. Regards Steve |
||
| Top | |
||
| dazza027 |
|
||
|
Limp home mode? Did you swap the ECU as well?
|
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
LHM is stuck in third. taking off in third, always in third. happened to me before
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Germeinguy |
|
||
|
Changed CPU no difference, goes from 1st to 3rd no probs.
|
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
Does the EA have a TCM for the auto and the EB or just the EA as this will cause it to no lock up the torque converter into 4th, you can bypass this by installing a frequency switch and adjust it to suit the speed (ie lock up the TC at 90k) if you locate the lock up wire from the wiring harness? that is if it dont have a TCM in the EB? but in the EA
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| Germeinguy |
|
||
|
Thanx all but still have the same prob ! turns out both cars have the TCM, I did change them just in case but still the car will not go into 4th.
Steve |
||
| Top | |
||
| gusbus |
|
||
|
this happens to mine every now nd the since i put the el trans and mottor in it......wouldnt mind knowing how to make it go into forth with out wiring the tcm to the ecu
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 86 guests |
