|
| cczfairmont |
|
||
|
Does anyone have a picture or can point me in the right direction as to where I can find the "Automatic Transmission Extension Housing Seal"?
It is apparently leaking on my AU Fairmont. thanks alot |
||
| Top | |
||
| cjh |
|
|||||
|
It's where the tailshaft slip-yoke goes into. You'll have to check the slip-yoke bush too.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||||
| Top | |
|||||
| redog |
|
||
|
Hi try BEARING WHOLESALERS
FACT 3/35 RADLEY ST VIRGINIA QLD 4014 PH (07)3265-4144 FAX (07)3265-5599 EMAIL virginia@bearingwholesalers.com.au part number should be 402965P, they do heaps of automotive stuff, should be cheap too!!! cheers |
||
| Top | |
||
| cczfairmont |
|
||
|
is what i circled in red correct?
Attachment: AU extension housing 001_resize.jpg [ 25.07 KiB | Viewed 361 times ] |
||
| Top | |
||
| frd906n |
|
||
|
i got mine done for 100 bucks, also put a new uni joint in as well,
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| frd906n |
|
||
|
i got mine done for 100 bucks, also put a new uni joint in as well,
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| taxi 5L |
|
||
|
They should be only $5-10 at a spare parts joint, i think i payed $3.50 for the last one i bought. How is your extension bush ? as to much play between it and your yoke will make the seal leak too and have a slight vibration while driving too...
phill |
||
| Top | |
||
| Papa Smurf |
|
||
|
Ford Part number for the seal is BA 7S039A $17.35 and the Bush for the extension housing
XA 7A034APF $26.70. You should also change the Bolts and Nuts holding the Tailshaft in at the Rear Axle but most people don't, part number V 800348S100 $7.80 ea (need 4) and the Nut, W 520405S36D $5.10 ea. |
||
| Top | |
||
| cjh |
|
|||
|
Papa Smurf wrote: Ford Part number for the seal is BA 7S039A $17.35 and the Bush for the extension housing XA 7A034APF $26.70. You should also change the Bolts and Nuts holding the Tailshaft in at the Rear Axle but most people don't, part number V 800348S100 $7.80 ea (need 4) and the Nut, W 520405S36D $5.10 ea. Is that bush the plain bearing material bush, or the bronze bush????? The BA seal is better than any aftermarket seal, they have 4 lips, not 2.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| fatwombat |
|
||
|
Just did the NF Fairlane Ghia today. Had a very slow drip for a few months, about one drip of fluid per night onto the concrete. Paid $460 to get it fixed, which included flushing the diff oil which I've been meaning to do for ages.
Exactly the same parts that Papa Smurf said, today's prices (in Broome, WA): XA7A034APF - Bushing Ford - $28.77 BA7S039A - Extension Housing Seal - $19.64 Not sure if the bush is the bronze one or not - I did ask for it but who knows what these muppets would have done. |
||
| Top | |
||
| cjh |
|
|||
|
fatwombat wrote: Just did the NF Fairlane Ghia today. Had a very slow drip for a few months, about one drip of fluid per night onto the concrete. Paid $460 to get it fixed, which included flushing the diff oil which I've been meaning to do for ages. Exactly the same parts that Papa Smurf said, today's prices (in Broome, WA): XA7A034APF - Bushing Ford - $28.77 BA7S039A - Extension Housing Seal - $19.64 Not sure if the bush is the bronze one or not - I did ask for it but who knows what these muppets would have done. I recently went to the Ford dealer, and the Bronze bush has been dropped, so, only white-metal ones available now....  ................sound right to you Papa Smurf???????
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 19 guests |
