|
| wild_cleveland |
|
|||
|
the aux shaft bolt was sheared off on my engine due to tensioner done wrong now how do i remove the sheared off bolt on the aux shaft and i have removed the cam angle sensor aswell
_________________ If it has wheels or a skirt, You can't afford it. |
|||
| Top | |
|||
| Krytox |
|
|||
|
so one of the backing plate hex bolts has sheared off?
If so undo the other one, and pull the shaft out. if thats an issue, remove the gear, grind the head right off if there's no way to undo the rooted one, and then pull it out, drill + easyout and or retap.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| wild_cleveland |
|
|||
|
no not the backing plate, the actual bolt that holds the gear into the front of the block and whatever it drives. the tensioner was done up wrong and snapped a guide and the bolt sheared off the aux shaft letting the gear fly around in there without anything holding it.
_________________ If it has wheels or a skirt, You can't afford it. |
|||
| Top | |
|||
| Krytox |
|
|||||
|
so the head missing and the gears loose? why cant you remove it? and undo the plate and pull out the shaft? you can lever it from the dizzy hole.
_________________ Carefree, we may not be number one, but we're up there. |
|||||
| Top | |
|||||
| wild_cleveland |
|
|||
|
yeah the gear opposite the water pump it was just held in by the chain, cant pull it out cause the bolts sheared off in there i presume, you can lever it out through the dizzy-hole? but what if the bolts still in there and just snapped off.
_________________ If it has wheels or a skirt, You can't afford it. |
|||
| Top | |
|||
| Krytox |
|
|||
|
behind the gear, is a oval plate, with 2 hex bolts (which i think your talking about are snapped off)
if they're completely gone, the aux shaft will pull towards you. If theres a little bit left of even burnished to the plate, you should be able to pull it out with force (providing the dizzy/synchronizer is out) Failing that, undo the gear 17mm bolt on the gear itself remove and tackle the aux holder? Don't forget the head of bolts does the work, not the bolt itself?¿ so if its not there. there's minimal holding it.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| wild_cleveland |
|
|||
|
its the 17mm bolt that is snapped off!!!!!!!!
_________________ If it has wheels or a skirt, You can't afford it. |
|||
| Top | |
|||
| Krytox |
|
|||
|
Then the gear will pull off.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| wild_cleveland |
|
|||
|
i have the gear off but not the remainding bolt thats stuck in the block
_________________ If it has wheels or a skirt, You can't afford it. |
|||
| Top | |
|||
| Krytox |
|
|||
|
then you'll need to remove the aux shaft, drill and easyout the broken bolt or replace the shaft itself.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
wild_cleveland wrote: i have the gear off but not the remainding bolt thats stuck in the block that 17mm bolt screw into the shaft not the block if you mean the 17mm bolt has snapped off and the gear is off..you now only need to undo the 2 allen key bolts holding the shaft retainer plate and pull the aux shaft out as discribed above. once you get the shaft out you need to try get that snapped bolt out of the shaft or you will need a new aux shaft... |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 139 guests |
