|
| blackbird252l |
|
||
|
Hey guys im thinking of putting a Turbo in my AU but was thinking it would be much cheaper and easier if i just buy an engine with a turbo so my question is can i fit a BA/BF Engine in my FORD AU Car? thanks
|
||
| Top | |
||
| frd906n |
|
||
|
search is ur friend
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| blackbird252l |
|
||
|
frd906n wrote: search is ur friend cant find anything thats why im here |
||
| Top | |
||
| krisisdog |
|
|||
|
frd906n wrote: search is ur friend f**k you post some useless s**t up. It'll be similar to what has to be done in the E series cars, but you could possibly drop the entire dash and ecu into the AU. Theres info on here of it going into an EL mont, and a couple of EA-Ds |
|||
| Top | |
|||
| frd906n |
|
||
|
Quote: f**k you post some useless s**t upQuote: lol
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| frd906n |
|
||
|
http://www.fordforums.com.au/showthread ... ge=1&pp=30
Just did a search on google and came with pages of results, one above u have to be reg with aff but its been done
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| krisisdog |
|
|||
|
frd906n wrote: Quote: f**k you post some useless s**t upQuote: lol We'll call this exhibit 'B'. |
|||
| Top | |
|||
| blackbird252l |
|
||
|
would it be cheaper just to buy a BA/BF turbo or cheaper to put the turbo engine in the AU? coz i really dont like the look on the BA/BF xr6 im more to the AU XR6 look more then the BA/BF look, iv only seen 1 AU XR6 turbo and they guy spent almost 12K just for the turbo kit and tuning and i really CBF spending that much just to turbo the AU
|
||
| Top | |
||
| frd906n |
|
||
|
You can get the early model xr6 turbos under 20 grand now, like the 2003, 2004 even 2005 models are cheap now,
Rather buy one of them then spend 12 or more on a turbo,
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| krisisdog |
|
|||
|
blackbird252l wrote: would it be cheaper just to buy a BA/BF turbo or cheaper to put the turbo engine in the AU? coz i really dont like the look on the BA/BF xr6 im more to the AU XR6 look more then the BA/BF look, iv only seen 1 AU XR6 turbo and they guy spent almost 12K just for the turbo kit and tuning and i really CBF spending that much just to turbo the AU If you want to turbo your current SOHC 4.0, you're looking at about $3k for a basic snort kit, plus whatever else is needed, so double that to $6k and you should have everything covered (exh, tune, clutch/stronger auto, diff, fuel pump etc etc) If you can do everything yourself you'll be able to drop the DOHC in for about the same money. |
|||
| Top | |
|||
| Froudey |
|
||
|
hmmm, search in the ferntree gully area, they put on into a au wreck and had it running off a VCT AU ecu
_________________ R.I.P Tobias my son. |
||
| Top | |
||
| Dansedgli |
|
||
|
krisisdog wrote: blackbird252l wrote: would it be cheaper just to buy a BA/BF turbo or cheaper to put the turbo engine in the AU? coz i really dont like the look on the BA/BF xr6 im more to the AU XR6 look more then the BA/BF look, iv only seen 1 AU XR6 turbo and they guy spent almost 12K just for the turbo kit and tuning and i really CBF spending that much just to turbo the AU If you want to turbo your current SOHC 4.0, you're looking at about $3k for a basic snort kit, plus whatever else is needed, so double that to $6k and you should have everything covered (exh, tune, clutch/stronger auto, diff, fuel pump etc etc) Quaduple it if you want a gearbox that will take decent power. Times it by 6 if you want your bottom end to handle the same 300rwkw that a stock BA can. |
||
| Top | |
||
| Michael (HYPOEB) |
|
||
|
ashcook wrote: frd906n wrote: You can get the early model xr6 turbos under 20 grand now, like the 2003, 2004 even 2005 models are cheap now, Rather buy one of them then spend 12 or more on a turbo, 20k? You can get them for around 10k. BA XR6T for 10k? Where?
_________________ EBT-747 - |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 71 guests |
