|
| MICKYYYY |
|
||
|
Hi all,
I havent had a decent powered car for a while now and itching for it so im thinking i should do a engine conversion in my EL XR6 till i find a immaculate EF/EL XR8. Doing a BA/BF engine conversion and wanted to know cost's and whats involved in the conversion, till i find a nice XR8 I already have a fabricator to cut K frame and tuner and may have someone to install BA/BF factory ecu and exhaust shop. If anyone who has done the conversion plz chime in and give me a run down. Im tossing up if i should just buy BA/BF long block and get a 6boost T04Z turbo kit to have a fresh turbo setup??? Thanks in advance
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
Do a search as this has been covered many many a times before.
From memory, you need to modify the bonnet and also change the interior for dash cluster to fit and other things. But do a search
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| MICKYYYY |
|
||
|
comhelp
Thats very helpful advice bud  LOLIts actually a 3 part question and the main is COST and no one has costs in there thread which im mainly looking at.
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| comhelp |
|
||
Age: 41 Posts: 638 Joined: 6th Nov 2004 Ride: 1994 Ford EF Fairmont Ghia Sedan Location: Melbourne |
That is because alot of people that have done it, have done all the manufacturing work themselves.
Follow this build thread from here onwards. It describes the install process AND price http://www.fordmods.com/the-garage-f53/benj-s-eb-t5-ghia-wagon-t71774-1828.html
_________________ 1994 ford fairmont ghia - Currently 302 with T5 - Work in progress |
||
| Top | |
||
| EFFalcon |
|
|||
|
cost depends on where you source the parts.. and thats going to be different for a lot of people.
do some research yourself and price things to get a good idea. given there are drive in/drive out conversions for a little under $7000
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
Drive in Drive out for $7000.00 sounds good to me but who does that in Sydney???
If my bro didnt move to QLD then things would be much easier as he knows how to do conversions pretty well.
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 88 guests |
