|
| EFFalcon |
|
|||
|
do you NEED the cam gears?
wtf did JETXR do to get it running with the wolf?
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| glenneaux |
|
||
|
EFFalcon wrote: do you NEED the cam gears?
wtf did JETXR do to get it running with the wolf? didnt they dodgy something up with its boost control system? same s**t different bucket really. |
||
| Top | |
||
| Dansedgli |
|
||
|
Nah you dont need cam gears. They help but they arent that important IMO. RSWPN made 280rwkw ish with no cam gear mods at all using a ems 8860.
My car ran good when it ran too. I reckon the ECU was faulty or something. It would run fine then die and not start again for an unknown reason. Maybe it was wired up wrong. |
||
| Top | |
||
| EFFalcon |
|
|||
|
ah screw that then.
one thing ticked off the list.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| glenneaux |
|
||
|
cam gears and dvct FTW!!!!!!!!
|
||
| Top | |
||
| Damo |
|
|||
|
I have done it. Send me $1000 and I will send you the blueprints of how it's done.
Cheers, Damo |
|||
| Top | |
|||
| fordman351 |
|
|||
|
glenneaux wrote: cam gears and dvct FTW!!!!!!!!
The Atomic cam gears mentioned were to delete the VCT actuator and in it's place have a vernier gear instead. |
|||
| Top | |
|||
| Steady ED |
|
|||
|
Just do it glenneaux, its pretty easy, some dude I know sent me a video of one running in an e series, and hes a fair s**t so i think there is no reason you couldn't do it.
Just give it a crack bro!
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| EFFalcon |
|
|||
|
fordman351 wrote: glenneaux wrote: cam gears and dvct FTW!!!!!!!! The Atomic cam gears mentioned were to delete the VCT actuator and in it's place have a vernier gear instead. so the vernier gears just mean you can adjust them to where ever YOU want them. obviously no VCT, i'm curious to know what the cam phasers do when they get no signals at all.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| Steady ED |
|
|||
|
Wasn't it discussed that because they are oil pressure based, and if the solenoid isn't pulsed, they just go all over the joint with oil pressure?
You'd need something that a)can read the cam position and then b)pulse the solenoid in relation to that reading. Hence why boost control on the wolf3d worked I guess with JETXR. Cam position instead of boost, still pulsing a solenoid. Dunno how you would take a signal from the cams and turn it into a 0-5v that the boost would be though... Having said that though, you'd think you could just close the solenoid, have zero pressure and they would have to be locked into a neutral position. Doubt Ford would have made it so if the solenoid fails they fully retard or advance, possibly causig PV clearance problems.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| EFFalcon |
|
|||
|
yeah, i'd imagine they'd have a fail safe position.
id' be suprised if they just moved all over the place. if you can use boost control then surely you could do something along the lines of a RPM switch or something. so hard to get a definitive answer on the cams.
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 64 guests |
