Fordmods Logo

ba six trouble 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: ba six trouble
Posted: Sat Sep 25, 2010 6:34 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 622

Joined: 24th May 2007

Gallery: 9 images

Ride: 97 TICKFORD XR6 Manaul

Location: Aldinga Beach
SA, Australia

one of my mates has a ba six auto that has been playing up lately and after seeing a mechanic
we have found the issue to being a faulty gasket between the lower bbm and engine
but after replacing it the car wont idle correctly and the is no throttle
we have checked all the plugs but every thing is on

can someone please help me as im not all that sure with this electronic throttle the b series has
Top
 Profile  
 
 
 Post subject: Re: ba six trouble
Posted: Sat Sep 25, 2010 6:38 pm 
Getting Side Ways
Offline

Age: 34

Posts: 747

Joined: 8th Nov 2009

Ride: ford au

Location: brisbane
QLD, Australia

could be a ford job, have no clue on the ba throttle system

 

_________________

Daily Driver, Series 1 Au Forte

Quote:
Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors

Top
 Profile  
 
 
 Post subject: Re: ba six trouble
Posted: Sat Sep 25, 2010 6:44 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 622

Joined: 24th May 2007

Gallery: 9 images

Ride: 97 TICKFORD XR6 Manaul

Location: Aldinga Beach
SA, Australia

that f**k sucks

the car will start but have no throttle but if you take the air intake pipe off and use your thinger to open up the throttle even a little the car turns off
the engine light is on now too
Top
 Profile  
 
 
 Post subject: Re: ba six trouble
Posted: Sat Sep 25, 2010 6:47 pm 
Getting Side Ways
Offline

Age: 34

Posts: 747

Joined: 8th Nov 2009

Ride: ford au

Location: brisbane
QLD, Australia

try resetting the ecu, by pulling the terminals off the battery for hour or so reconnect them, then take it for a bit of a hard drive

 

_________________

Daily Driver, Series 1 Au Forte

Quote:
Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors

Top
 Profile  
 
 
 Post subject: Re: ba six trouble
Posted: Sat Sep 25, 2010 7:16 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 622

Joined: 24th May 2007

Gallery: 9 images

Ride: 97 TICKFORD XR6 Manaul

Location: Aldinga Beach
SA, Australia

currantly doing that now 15 more mins to go will post update with results
Top
 Profile  
 
 
 Post subject: Re: ba six trouble
Posted: Sat Sep 25, 2010 7:57 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 622

Joined: 24th May 2007

Gallery: 9 images

Ride: 97 TICKFORD XR6 Manaul

Location: Aldinga Beach
SA, Australia

ok so now the car wont even start and after getting to start it stills runs like ints on 5 cylinders
Top
 Profile  
 
 
 Post subject: Re: ba six trouble
Posted: Sat Sep 25, 2010 8:00 pm 
Getting Side Ways
Offline

Age: 34

Posts: 747

Joined: 8th Nov 2009

Ride: ford au

Location: brisbane
QLD, Australia

my suggestion is ring the mech who did the gasket and get him to fix the problem

 

_________________

Daily Driver, Series 1 Au Forte

Quote:
Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors

Top
 Profile  
 
 
 Post subject: Re: ba six trouble
Posted: Sun Sep 26, 2010 8:17 am 
Moderator
Offline
User avatar

Age: 47

Posts: 2485

Joined: 6th Oct 2005

Ride: 93EB Fairmont / BA Falcon XR6T

Location: Western Sydney
NSW, Australia

engine light on the BA usually relates to an electronic throttle issue

 

_________________

93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU.
2004 BA MKI XR6T in Lightning Strike paint / K&N / XR8 bonnet / BF lights and a few tweaks.

Top
 Profile  
 
 
 Post subject: Re: ba six trouble
Posted: Thu Sep 30, 2010 10:37 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 622

Joined: 24th May 2007

Gallery: 9 images

Ride: 97 TICKFORD XR6 Manaul

Location: Aldinga Beach
SA, Australia

i did the gasket change myself

but all fixed now we pulle a plug wire too tight and wasnt connecting prober :oops:
Top
 Profile  
 
 
 Post subject: Re: ba six trouble
Posted: Thu Sep 30, 2010 10:54 pm 
Parts Gopher
Offline

Posts: 50

Joined: 10th Jun 2009

Ride: 97 EL sedan

Location: southeast Queensland
QLD, Australia

Are you sure you plugged everything in correctly ?

I know SFA about BA's but from what I've read on another forum , it sounds like you may have plugged the Map sensor plug into the TPS and the TPS plug into the Map sensor maybe ?
Top
 Profile  
 
 
 Post subject: Re: ba six trouble
Posted: Thu Sep 30, 2010 11:02 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 622

Joined: 24th May 2007

Gallery: 9 images

Ride: 97 TICKFORD XR6 Manaul

Location: Aldinga Beach
SA, Australia

yeah its all fixed now
yeah it was a mixure of that and streched cable which needed fixing
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 82 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Nov 26, 2024 7:42 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names