|
| andrewmogic |
|
||
|
I was wondering if anyone could help.
Once the car heats up, after driving for a while, i begin to get a rattle which i believe is coming from the exhaust, (or under the car at least). If i put it into drive, and have the brake on at idle it makes the same sound, but only after ive driven it for 10ish minutes. Then once i put it into park it goes away unless i rev it as seen in the video. If anyone could give me some insight as to what this might be, and if the repair would be a pretty simple job, as im keen on saving some money by doing it myself (having recently spent $270 to get the rear door actuator replaced). http://www.youtube.com/watch?v=f2jCbZ0fAUI Also the car is on injected gas, if that makes any difference |
||
| Top | |
||
| Papa Smurf |
|
||
|
I think you will find that this is the heat shield on the Catalytic Converter. It was a problem with BA/BF exhausts and usually requires put a BIG Hose clamp (or Two) on the Cat to shut it up.
|
||
| Top | |
||
| andrewmogic |
|
||
|
Some of my mates yesterday seemed to think id be best taking it to an exhaust shop and getting them to suss it out, but you think the hose clamp should do it ?
|
||
| Top | |
||
| Papa Smurf |
|
||
|
That's what they used to do at the Dealership I worked for.
|
||
| Top | |
||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
My car does the same once it gets hot. Bloody annoying..
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
BA's and BF's did this rattle thing. It was found that the heat shield was the problem so, the mechs used to be VERY large Hose Clamps on them to shut em up.
|
||
| Top | |
||
| andrewmogic |
|
||
|
Papa Smurf wrote: BA's and BF's did this rattle thing. It was found that the heat shield was the problem so, the mechs used to be VERY large Hose Clamps on them to shut em up. Sorry mate, youre saying put the hose clamp around the cat or the heat shield? |
||
| Top | |
||
| Papa Smurf |
|
||
|
On the heat shield on the Cat.
|
||
| Top | |
||
| TROYMAN |
|
||
|
or you can do what I did to the my au when it had std exhaust and just take the heat shield off..
|
||
| Top | |
||
| andrewmogic |
|
||
|
Papa Smurf wrote: On the heat shield on the Cat. hey mate we tried chucking some hose clamps on either side of the cat, but to no avail. Do you mean around the whole thing, because thats what we're gonna try next. ill upload a video of the sound again, this time a little more intense, that way you can just check its the same thing.. |
||
| Top | |
||
| TROYMAN |
|
||
|
maybe the cat is stuffed....???
|
||
| Top | |
||
| andrewmogic |
|
||
|
Heres another video of the sound,
Hopefully the video is processed by the time you guys see it, http://youtu.be/BKFkjA3y0Ao i think you can just see where we chucked one of the hose clamps. |
||
| Top | |
||
| Papa Smurf |
|
||
|
The second link didn't work but the first one is definitely the shield. The hose clamps have to be large ones, like 4-5".
|
||
| Top | |
||
| Mad2 |
|
|||
|
hmmm interesting
mate just bought a FG sedan not long ago & he has a rattle too, but only when he goes over humps [think thats what he said?] hes just about had the rear rebuilt lol & still there 
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 79 guests |
