Hey guys wondering if anyone on here has had the same sort of issue when cold starting there car.
I start it and the response on the accelerator when pressed drops the revs unless I give it a good stab. If left when started it ends up hunting and chugging, engine light comes and I have to turn off and turn back on and then it's back to normal,
Any ideas will be greatly appreciated

Mate you need to have a scan tool connected up to check the operating pids out. One cam phaser might not be locking when the engine is turned off, or the cam and crank signals are out of time. The fault code will be stored in the pcm's memory. If I lived in ballarat I would check it for you.

Hey mate thanks for the reply, I will get it scanned was just wondering if there was another easy issue, so if that's the case then how does that get fixed ?

Hey mate thanks for the reply, I will get it scanned was just wondering if there was another easy issue, so if that's the case then how does that get fixed ?

A scan is the easiest and quickest way to find the problem, without hearing the engine running I would only be guessing. shouldn't cost you more than fifty bucks for a scan.