|
| jakebox |
|
|||
|
Hello Everyone
 Because of my love for the BA falcon And my thirst for more performance Im planning on Building up an engine. I'm Sadly still on my P Plates and will be on my opens july next year so i have some time up my sleeve to get this done (And saving because I'm only on a small wage)I have bought an Engine Stand and am getting a Good Condition Barra motor from some localish wreckers on Friday hopefully! (They tell me they all have less than 150,000, however i don't see that this matters as im fully stripping her down?) Only $220! (bare motor) Can't go wrong  lolOnce the engine is done i will be getting a BA car I was thinking EX taxi? Unless there is a reason i shouldn't? So Plan is for this to be turbo. What can i do to this engine to get it tough and ready for a Turbo? I have looked at Atomic Performance Parts and Nizpro Havent worked out prices with Atomic yet but Nizpro Looks WAY out of my budget lolSo please guys any advice would be great Thanks guys!
_________________ 2003 BA FALCON XT |
|||
| Top | |
|||
| jakebox |
|
|||
|
I will be taking heaps of Quality Photo's and possibly some HD video as i just got a new camera
_________________ 2003 BA FALCON XT |
|||
| Top | |
|||
| jakebox |
|
|||
|
This is the engine mount i got, Its supposed to be good for 550KGs or so
_________________ 2003 BA FALCON XT |
|||
| Top | |
|||
| TROYMAN |
|
||
|
atomic are not cheap either, be prepaired to spend over 10g.
|
||
| Top | |
||
| jakebox |
|
|||
|
TROYMAN wrote: atomic are not cheap either, be prepaired to spend over 10g. I hope there may be some other alternatives out there Thanks for letting me know I will be happy with 500HP so i may not need to go to all the extremes That Nizpro and Atomic have Cheers mate Jakob
_________________ 2003 BA FALCON XT |
|||
| Top | |
|||
| TROYMAN |
|
||
|
you chasing 500hp from the engine or at the wheels???
|
||
| Top | |
||
| jakebox |
|
|||
|
TROYMAN wrote: you chasing 500hp from the engine or at the wheels??? Im not too sure yet at the wheels would be nice. But i will see how i go. I am still learning along the way and want to do a big write up for people as i get along as well.
_________________ 2003 BA FALCON XT |
|||
| Top | |
|||
| TROYMAN |
|
||
|
in turbo form you can get 500hp at the engine from a stock bottom end,
500hp at the wheels is going to need a decent bottom end eg rods and pistons ect... n/a, be willing to spend 20g to get that sort of power.... |
||
| Top | |
||
| jakebox |
|
|||
|
TROYMAN wrote: in turbo form you can get 500hp at the engine from a stock bottom end, 500hp at the wheels is going to need a decent bottom end eg rods and pistons ect... n/a, be willing to spend 20g to get that sort of power.... I'm looking into it Its a project for me to do over 1-2 years so we will see how i go i suppose 500HP at the engine might be what i will have to go for. However im Looking online and still think i might upgrade pistons and conrods Still allot of research to do Thanks for letting me know!
_________________ 2003 BA FALCON XT |
|||
| Top | |
|||
| jakebox |
|
|||
|
TROYMAN wrote: in turbo form you can get 500hp at the engine from a stock bottom end, 500hp at the wheels is going to need a decent bottom end eg rods and pistons ect... n/a, be willing to spend 20g to get that sort of power.... From looking into it more, i think i will aim for around 400kw at the wheels. thanks
_________________ 2003 BA FALCON XT |
|||
| Top | |
|||
| TROYMAN |
|
||
|
jakebox wrote: TROYMAN wrote: in turbo form you can get 500hp at the engine from a stock bottom end, 500hp at the wheels is going to need a decent bottom end eg rods and pistons ect... n/a, be willing to spend 20g to get that sort of power.... From looking into it more, i think i will aim for around 400kw at the wheels. thanksthats around 530rwhp, which works out approx 650+hp at the engine, big money will need to be spent....
|
||
| Top | |
||
| Mont5.0 |
|
|||
|
why dont you start with a Turbo short motor and tuffen that up!
|
|||
| Top | |
|||
| jakebox |
|
|||
|
TROYMAN wrote: jakebox wrote: TROYMAN wrote: in turbo form you can get 500hp at the engine from a stock bottom end, 500hp at the wheels is going to need a decent bottom end eg rods and pistons ect... n/a, be willing to spend 20g to get that sort of power.... From looking into it more, i think i will aim for around 400kw at the wheels. thanksthats around 530rwhp, which works out approx 650+hp at the engine, big money will need to be spent.... I think it will be worth it And over a couple years that much money doesn't seem like too much, I think i can get away with it and the Missus won't get mad hahaI just need to decide what parts im going to go for. Decide what i can make myself and what i will need to buy. And go from there
_________________ 2003 BA FALCON XT |
|||
| Top | |
|||
| jakebox |
|
|||
|
Mont5.0 wrote: why dont you start with a Turbo short motor and tuffen that up! Is there much difference between the N/A and the Turbo? From what i understood only Pistons and cam? I might be wrong here Cheers,
_________________ 2003 BA FALCON XT |
|||
| Top | |
|||
| bry40l |
|
|||
|
jakebox wrote: Mont5.0 wrote: why dont you start with a Turbo short motor and tuffen that up! Is there much difference between the N/A and the Turbo? From what i understood only Pistons and cam? I might be wrong here Cheers, If your building an engine doesnt matter what block you start with, at the end of the day its getting pistons rods rings aftermarket cams springs ect for the boosted application,
_________________ BF XR6 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 54 guests |
