|
| aristopwr |
|
||
|
I am looking to replace both the I6 engine and 4spd auto from
my 2003 BA fairmont ghia with a I6 and 4spd auto from a 2007 XR6. Wanting to know from those who have done it before what the process was in regards to wiring looms, sensors ect? Is it a relatively straight forward job or not? Thanks. |
||
| Top | |
||
| Mad2 |
|
|||
|
aristopwr wrote: I am looking to replace both the I6 engine and 4spd auto from my 2003 BA fairmont ghia with a I6 and 4spd auto from a 2007 XR6. Wanting to know from those who have done it before what the process was in regards to wiring looms, sensors ect? Is it a relatively straight forward job or not? Thanks. as has been mentioned previously..... swap over BA engine/gearbox loom to BF, swap inlet manifold [gasket most likely stuffed anyway] with the BA unit. you shouldn't have a major problems. the BF uses a different engine oil filter. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 30 guests |
