|
| SQUEAK |
|
||
|
Hey, Im almost finished putting the engine back together in my fairmont and I want to change the cam while its apart....
Im thinking either a wade 1521a or A crow stage 4.... 2222546 What are peoples thoughts? And I know im going to need to get tge computer chipped to run these cams so where in sydney can I get that done? And roughly how much would it cost? Also as my car is auto, Will I need to get a stall or will the factory 1 be ok with some lower gears in the a***.... 3:9s? Thanks heaps people, I need to know asap as I want the engine back in the car by the weekend! Last of all has anyone got one of these cams in there car? And if so do you have any power figures or comments? Oh yeah and before I forget, Where abouts in sydney is the best place to get a set of pacemaker extractors the comp ones for my car? And what are they worth? Thanks heaps.... Squeak
_________________ Fuk it, You only live once!!! |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
surecam do a cam and chip deal with a very similar cam to those too.
work alot cheaper if you dont intend to take things any further with some thing like that a higher stall torque converter and some 3.45 gears would help alot |
||
| Top | |
||
| stockstandard |
|
|||
|
I personally wouldnt put either in front of an auto, but if you are going to then id say be prepared to do both the diff and the stall.
_________________ Stoke me a clipper, I'll be back for Christmas |
|||
| Top | |
|||
| low ghia |
|
|||
|
wade 1636
i dunno what ecu ure runnin but as i got the xr one it handles the cam great,you may need another one as even with mine it took a week for the car to stop stalling when i stopped.. now running sweet
_________________
|
|||
| Top | |
|||
| Futura_XR |
|
|||
|
i agree..... WADE 1636!!!
 an awesome profile!
_________________ Past: 150rwkw 5spd EF Futura - 4499's, 2.5" exh, Intake, Filter, Wade 1636, Head and Valve Work, Raised Comp.
|
|||
| Top | |
|||
| jonbays |
|
||
|
those are good cams but i would say its going to be tricky with a stock ecu and an auto
The auto stalls up at 1800-2000rpm and is so high geared any cam with a narrow high powerband with a poor idle will be a total s**t to drive. In a manual what would be fun is a pain in the arese with an auto. I have never regretted the dev3hl which works with the auto stock ecu and gives good power. Sure i have wanted more power but the driveability was worth more to me for a daily driver. The 1636 is also a good cam for an auto too and heaps cheaper. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 62 guests |
