|
| Mr. Xpressionz |
|
|||
|
Hey guys I live in Perth and called BPT Motorsport and they gave me a quote for stage 2 cams for about 3 grand. I already had a custom tune from them so just a dyno its 120 per hour which im ok with. But they were saying that stage 2 Crow Cams will cost between $1400-$1800 by themselves and labour would cost around $800-$900. Does this sound correct? Bear in mind iv'e already paid for a custom tune so they weren't going to charge me for all the extras just the dyno time which for 1-3 hours would be $120-$360.
-Crow cams really that expensive? -Labour that expensive as well? they charge around $190 an hour.
_________________ 08 FG F6 #326. 4" Xforce exhaust turbo back with mid muffler delete, 1000cc injectors, 20% Underdrives, Stage 2 intercooler and piping, Stage 2 gear box, Upgraded flex plate, upgraded transcooler, upgraded fuel pump, Streetfighter air intake, cooler thermostate, SCT tune at 20psi at 406rwkw |
|||
| Top | |
|||
| dat111 |
|
||
|
ring CMS (ceasent motorsport) they will give you a price but yes around 3000 for 2 billet cams(brand new) 190 an hour is bloody steep id be shopping around and try wade,JMM,camtech, etc...
never stick to one place always shop around even if you gotta buy parts from other places |
||
| Top | |
||
| Krytox |
|
|||
|
Sound VERY expensive for what you get.
But then again, your in WA, just blame the mining. I go there 2-3 times a year and you can't even get a single bed with a room no larger for less than $180 a night. in Vic you get a 2 bedroom with esuite and breakfast included!
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| REW93N |
|
|||
|
Sounds crazy expensive... Can get a whole head job in NSW for that.
That's right. A whole head job.
_________________ Blue blooded. |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
Try
http://www.atomicperformanceproducts.com/camshafts.html
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| EBXR8380 |
|
|||
|
Try
http://www.atomicperformanceproducts.com/camshafts.html
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| bry40l |
|
|||
|
REW93N wrote: Sounds crazy expensive... Can get a whole head job in NSW for that. That's right. A whole head job. by 6 different women...  oh wait..wrong head job 
_________________ BF XR6 |
|||
| Top | |
|||
| 67RCE |
|
||
|
REW93N wrote: Sounds crazy expensive... Can get a whole head job in NSW for that. That's right. A whole head job. DOHC Vs SOHC......
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| bry40l |
|
|||
|
67RCE wrote: REW93N wrote: Sounds crazy expensive... Can get a whole head job in NSW for that. That's right. A whole head job. DOHC Vs SOHC...... just get a stage 4 chip, then you can run xbox cheat codes
_________________ BF XR6 |
|||
| Top | |
|||
| Mr. Xpressionz |
|
|||
|
Yea true its Frikin EXPENSIVE as s**t here because of the mining but unfortunately I dont have a mining job
 Yea Ill def check out the other places thanks guys for the input! He also said the gain would give me about 30 to 40 extra KW not sure if thats RW dont think so though.
_________________ 08 FG F6 #326. 4" Xforce exhaust turbo back with mid muffler delete, 1000cc injectors, 20% Underdrives, Stage 2 intercooler and piping, Stage 2 gear box, Upgraded flex plate, upgraded transcooler, upgraded fuel pump, Streetfighter air intake, cooler thermostate, SCT tune at 20psi at 406rwkw |
|||
| Top | |
|||
| dat111 |
|
||
|
everything seem so expensive on the west coast of nsw,
|
||
| Top | |
||
| phongus |
|
|||
|
uniacidz wrote: dat111 wrote: everything seem so expensive on the west coast of nsw, West coast of NSW? Must be the floods?
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 28 guests |
