Fordmods Logo

Can I reuse the rocker cover gasket after removal 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: Can I reuse the rocker cover gasket after removal
Posted: Tue Apr 03, 2007 9:12 am 
Getting Side Ways
Offline
User avatar

Age: 55

Posts: 2537

Joined: 5th Nov 2004

Gallery: 13 images

Ride: EFII Fairmont

Location: Perth
WA, Australia

And, ever since I did my oil, 5.5L, oil filter and fuel filter, plugs and leads 3 weeks ago. I often now get high oil pressure readings.
Is that a concern, it coinsides with a slightly high volt reading on the battery guage too, so it could be the cluster.

Can I safely re-use the rocker cover gasket if I take the cover off?

Thanks.
Top
 Profile  
 
 
Posted: Tue Apr 03, 2007 9:20 am 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

make sure there is an extra earth lead from abbtery to the block

dont resuse the gasket simple!

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Tue Apr 03, 2007 9:28 am 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 11105

Joined: 15th Nov 2004

Ride: No Fords current

Location: Hobart
TAS, Australia

How high? LIke in the red high?

Personally I wouldn't be stingy, get a new gasket, as it's a pain in the a*** if yours doesn't seal again and you have to remove and replace it later.

Do you maybe have too much oil in it?

How highs the voltmeter reading?
Top
 Profile  
 
 
Posted: Tue Apr 03, 2007 9:42 am 
Getting Side Ways
Offline

Age: 43

Posts: 3794

Joined: 9th Aug 2005

Ride: Hilux

Location: Mornington
VIC, Australia

yeah you could reuse the gasket but the cheapness far outweighs the risk of it leaking again

 

_________________

Now driving a Hilux

Top
 Profile  
 
 
Posted: Tue Apr 03, 2007 10:46 am 
Getting Side Ways
Offline
User avatar

Posts: 3115

Joined: 20th Dec 2004

Ride: Falcon

Location: Adelaide
SA, Australia

Rocker cover gaskets are soft rubber and can be reused without any problems as long as they dont have any kinks in them

 

_________________

Stoke me a clipper, I'll be back for Christmas

Top
 Profile  
 
 
Posted: Tue Apr 03, 2007 12:04 pm 
Fordmods Junkie
Offline
User avatar

Posts: 3083

Joined: 22nd Sep 2005

Gallery: 13 images

Ride: EF

Location: Melbourne
VIC, Australia

yup you can reuse the gasket a number of times before it gets wonky and starts to leak.

example, when i was changing the timing on my cam every day, it lasted around 15 times before its was stuffed.

if you went with the "never reuse" theory, cam timing changes would be VERY costly

 

_________________

Image
latest mod: A Service
MY BUILD THREAD

Top
 Profile  
 
 
Posted: Tue Apr 03, 2007 8:53 pm 
Getting Side Ways
Offline

Age: 38

Posts: 3894

Joined: 15th Nov 2004

Gallery: 24 images

Ride: BF MKII V8 Fairmont Ghia

Location: Perth
WA, Australia

yep, i reused my 10 year old one ;)

the new one leaked, set engine on fire. pulled old one out of bin and whacked that on. no probs :D

 

_________________

2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows

Top
 Profile  
 
 
Posted: Sat Apr 07, 2007 7:16 am 
Getting Side Ways
Offline
User avatar

Age: 55

Posts: 2537

Joined: 5th Nov 2004

Gallery: 13 images

Ride: EFII Fairmont

Location: Perth
WA, Australia

Thanks for those replies.

The issue still continues. I did a bit of city driving on Thursday, and after an hour of stop start driving with air-con on, the battery volt gauge started to drop a bit, just below half way. Which affected the oil guage and the oil needle went into the low orange sending off the low oil pressure warning chime.
Somethings not quite right with the cluster like that. High battery reading sends the oil pressure gauge a bit high. Low battery, low oil pressure reading. Why is the oil guage affected by the volt gauge in that way?
Top
 Profile  
 
 
Posted: Sat Apr 07, 2007 8:14 am 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 906

Joined: 9th Aug 2005

Gallery: 4 images

Ride: EB2

Location: s.e suburbs
VIC, Australia

is the alt working right not over or under charging or the battery is stuffed . check them and check the wire from the alt to the battery the get corroded and break sometimes.
Top
 Profile  
 
 
Posted: Sat Apr 07, 2007 8:36 pm 
Stock as a Rock
Offline

Age: 40

Posts: 141

Joined: 17th Jun 2006

Ride: Falcon

Location: canberra
ACT, Australia

Check to make sure your PCV (positive crankcase ventilation) valve isn't blocked. It's the "thing" that goes into top of the rocker cover next to the filler cap.

It's designed to allow gas one way but not the other. ie gas from rocker cover to intake or intake manifold, depending on the car. eEasy way to check is to rattle it. if it makes no noise, it's blocked, clean it out with carbi cleaner or brake cleaner. If it's blocked you will always have leaking oil problems.

On cars like xf falcons and cars with similar engines, you will notice if it's leaking oil, it wont run properly. ie pull the dipstick on a properly running engine whilst the car is running and the car will stumble real bad.

 

_________________

Fords Rule. OK.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: Google [Bot], Google Adsense [Bot] and 130 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Nov 27, 2024 3:38 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names