|
| davo1990 |
|
||
|
ok so i did the AU motor and gearbix in a EF conversation i have hooked everything back up that iam aware of i went to start it but it seams like there is no power getting to the starter motor the lights on the dash are good and the fan turn on and off just has no crank and i hooked up the gear lever but wont go past drive i dont know if i f**k up or not but is there anything i can check or do before i get someone out
|
||
| Top | |
||
| SWC |
|
||
|
Have you connected the wire to the solenoid on the starter motor?
As for the gear shift, is the movement from Park to Drive or from First to Drive? Sounds like you have your gear linkage adjusted wrong. Crawl underneath, disconnect the linkage drom the box and adjust the gears with a shifter and see that the box is shifting through all gears. |
||
| Top | |
||
| davo1990 |
|
||
|
yep definitely conected that up and its from p to drive just p to drive how can i test if the starter motor is stuffed
|
||
| Top | |
||
| davo1990 |
|
||
|
yep definitely conected that up and its from p to drive just p to drive how can i test if the starter motor is stuffed
|
||
| Top | |
||
| SWC |
|
||
|
If it will only go, Park, Reverse, Neutral, Drive, then it may may be going Drive, 3rd, 2nd, first.
When you put the car in Park, can you roll it or is it locked in Park? |
||
| Top | |
||
| davo1990 |
|
||
|
no matter what gear i put it in u can roll it like its in nutral
|
||
| Top | |
||
| SWC |
|
||
|
Thats what I thought.
if the gar is "in gear" and not running it is just like being in neutral. I reckon you are selecting D-3-2-1. Remove the linkage and select Park from under the car. Then see wjhat happens. If it starts then you can reset you linkages from there. |
||
| Top | |
||
| davo1990 |
|
||
|
ok awsome thanks mate have u got any idea about the starting problem not even cranking
|
||
| Top | |
||
| SWC |
|
||
|
davo1990 wrote: ok awsome thanks mate have u got any idea about the starting problem not even cranking If the gearbo is actually in D-3-2-1 then it won't start because of the inhibitor switch. Get the gears sorted and see what happens then. One step at a time. |
||
| Top | |
||
| davo1990 |
|
||
|
yer sorry i forgot about that will let ya know how i go thanks mate
|
||
| Top | |
||
| davo1990 |
|
||
|
ok so it starts but wont idle but ill keep tinkering with her and see how i go thanks mate
|
||
| Top | |
||
| davo1990 |
|
||
|
ok i have a spare hose that goes somewere do u know what the black box is in the passanger side in the front bumper and were those hoses go from it
|
||
| Top | |
||
| SWC |
|
||
|
That is the charcoal canister.
The hose goes to a fitting on the head side of the BBM between #2 and #3 runner if my memory serves me right. |
||
| Top | |
||
| davo1990 |
|
||
|
yep that was the one thanks heaps again
|
||
| Top | |
||
| davo1990 |
|
||
|
iam not having a good run with this now everything is conected and went from an idle problem to wont stop reving like i have my foot flat on the accelerator i think it might be the throttle position sencor but wouldnt know what to do or were to start
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 56 guests |