|
| BEAR80 |
|
|||
Age: 44 Posts: 683 Joined: 4th Mar 2010 Ride: BF Fairmont Ghia & TS Magna Location: central coast |
hey guys
i am after some info and i have searched but found nothing whats the best way to change the spark plug leads on my car????? the dizzy is in a b*tch of a spot on these things cheers |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
I replaced them on my mates ED with all the goodies on. You should just replace one lead at a time and don't forget to do the coil lead. You just need patience and a small hand
 You might find it easier to remove the throttle body and ics from the car which will give you more room, just make sure you have a NEW Throttle body gasket to put back on. The throttle body is helo on by 4 screws with allen key heads, 6mm.
|
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
i remove the ISC on top of the throttle body. then just cram your hand in there.
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| BEAR80 |
|
|||
Age: 44 Posts: 683 Joined: 4th Mar 2010 Ride: BF Fairmont Ghia & TS Magna Location: central coast |
it sounds like fun NOT......i might remove my throttle body as i dont have small hands
anyways cheers for the info guys |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
You dont need to remove the throttle body. Its under where the leads are.
If you really get desperate remove the ISC for more room. Obviously you need to remove the air box and snorkel too. And good advice is change the leads when the engine is not hot. I might be doing the same thing shortly too.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
I changed the leads on my EB today. Didnt have to remove the throttle body or ISC. As Papa Smurf said do one lead at a time. I only had to jack the car up to put the coil lead back on. Its pretty easy to do mate. If you were local id do it for you.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| BEAR80 |
|
|||
Age: 44 Posts: 683 Joined: 4th Mar 2010 Ride: BF Fairmont Ghia & TS Magna Location: central coast |
how come you had to jack up the car to fit the coil lead on???
will be a few weeks till i install as i am cleaning up a MY04 RS impreza for sale cheers bear |
|||
| Top | |
|||
| misk_one |
|
|||
|
i extended my coil wires so my coil is above the manifold.
i can do anything dizzy and lead related now without take anything else off lol. i have an old dizzy cap i use to help me re attach the leads and i also run one lead through one section of manifold so i dont forget which one is which when i pull them off again. ie. 
_________________ XG Panelvan |
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
I had to jack up the car because i could not get my hand through up the top to put the coil plug in. It was easier to go by underneath. Misk you made a good decision by moving yours to an easier location. Luckily we dont do this often.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| misk_one |
|
|||
|
lol i pull mine apart so often that i need everything to be easily accessable and easy to put back together
_________________ XG Panelvan |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 110 guests |
