|
| sterps |
|
||
|
Hi guys.
Just was wondering the what exact process is for changing the BEM? I just bought another one from the wreckers, as my current one was a quick replacement for my old one, which was out of a wagon, so my boot button doesn't work :/. My car is an EL XR6, and i got another blue one. Do the numbers have to match up or anything also? Thanks |
||
| Top | |
||
| Krytox |
|
|||
|
Goes straight in, EF to EF and EL to EL only on this item.
Wagon one will still work with the boot button, it just needs to be programmed. You'll also need to train the BEM to the smartlock barrel, this takes 1hour. otherwise your car will be immobilized until you do this. basically remove the old one, install the new one, wind your window down (for so you cannot lock yourself out) turn the ignition ON for 1 hour or until the door locks cycle twice or when the smartlock jewel is steady on the dash, proceed to start the car and your done.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| sterps |
|
||
|
Woah hold up, did you say my current BEM can be reprogrammed so the boot button does work??!!
How can i do this? as the one that is in there is fine, just no boot button. |
||
| Top | |
||
| 94edfutura |
|
|||
|
wind your window down (for so you cannot lock yourself out) turn the ignition ON for 1 hour or until the door locks cycle twice or when the smartlock jewel is steady on the dash, proceed to start the car and your done.
Krytox wrote: Goes straight in, EF to EF and EL to EL only on this item.
Wagon one will still work with the boot button, it just needs to be programmed. You'll also need to train the BEM to the smartlock barrel, this takes 1hour. otherwise your car will be immobilized until you do this. basically remove the old one, install the new one, wind your window down (for so you cannot lock yourself out) turn the ignition ON for 1 hour or until the door locks cycle twice or when the smartlock jewel is steady on the dash, proceed to start the car and your done. |
|||
| Top | |
|||
| sterps |
|
||
|
Hmmm might as well put the other one in then, we did this with the current one and the boot button didn't work, you just hear a noise from the BEM.
I'll give this a go thanks guys |
||
| Top | |
||
| sterps |
|
||
|
Ok i've placed the new one in.
I've got the window down and have the key in auxillery, the smart lock is not flashing, is that right? |
||
| Top | |
||
| SWC |
|
||
|
Turn off everything, ie interior lights, radio etc. close the door withe the window down. Turn the ignition to reds (on) do not try and start the engine. and wait. The door locks will cycle, turn the ignition off and then start the car.
|
||
| Top | |
||
| sterps |
|
||
|
Does the car need to be locked when doing this? The smart lock light has been flashing for around an hour now and is still going...
|
||
| Top | |
||
| Krytox |
|
|||
|
everything about smartlock.
ford-interior-f14/smartlock-all-questions-answered-t56482.html?hilit=programming%20smartlock
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| SWC |
|
||
|
Take up to 60mins to do. Some cars are quicker than others.
|
||
| Top | |
||
| sterps |
|
||
|
Thanks for the help again guys, the beast runs again
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 108 guests |
