|
| TROYMAN |
|
||
|
ive also changed a few ratios..
i went from 2.92 to 3.08 to 3.45 and also back to 3.27 all in the same car and i just changed the speedo gear to suit and it worked fine every time... Last edited by TROYMAN on Wed Oct 01, 2008 9:34 pm, edited 1 time in total. |
||
| Top | |
||
| commandojones |
|
|||
|
Did this 2 months ago, 3.23 to 3.45, transducer on the drivers side rear end 1 8mm bolt unclip the old gear n put eh new one on. Dont do what i did, my green 3.23 gear dicintergrated and fell in my auto box!! can't find it. i expect to find it in pieces in my next fluid change.
Gear is all you need
_________________ EB 1 Fairmont - SOLD |
|||
| Top | |
|||
| SpeedyED |
|
|||
|
commandojones wrote: Did this 2 months ago, 3.23 to 3.45, transducer on the drivers side rear end 1 8mm bolt unclip the old gear n put eh new one on. Dont do what i did, my green 3.23 gear dicintergrated and fell in my auto box!! can't find it. i expect to find it in pieces in my next fluid change.
Gear is all you need Lol, that's what the clip is for! so it don't get lost in the gearbox! anyway I've done it now, I just gotta test it out on the street so yeah.
_________________ Pre AU Adapters for sale |
|||
| Top | |
|||
| commandojones |
|
|||
|
SpeedyED wrote: commandojones wrote: Did this 2 months ago, 3.23 to 3.45, transducer on the drivers side rear end 1 8mm bolt unclip the old gear n put eh new one on. Dont do what i did, my green 3.23 gear dicintergrated and fell in my auto box!! can't find it. i expect to find it in pieces in my next fluid change. Gear is all you need Lol, that's what the clip is for! so it don't get lost in the gearbox! anyway I've done it now, I just gotta test it out on the street so yeah. I never got to unclip the whole gear half of it was still in the box i put my finger in to pull it out or so i thought! n yeh 
_________________ EB 1 Fairmont - SOLD |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
commandojones wrote: Did this 2 months ago, 3.23 to 3.45, transducer on the drivers side rear end 1 8mm bolt unclip the old gear n put eh new one on. Dont do what i did, my green 3.23 gear dicintergrated and fell in my auto box!! can't find it. i expect to find it in pieces in my next fluid change.
Gear is all you need hahahahah it WILL NOT be in the oil it will be in the rear extension housing which is separate from the box internals!
_________________ RIP SCOTT |
|||
| Top | |
|||
| commandojones |
|
|||
|
Do i need to worry about it?, its giving me no trouble yet
_________________ EB 1 Fairmont - SOLD |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
commandojones wrote: Do i need to worry about it?, its giving me no trouble yet
hahah nar man it will not get into the insides of the box 
_________________ RIP SCOTT |
|||
| Top | |
|||
| snap0964 |
|
|||
|
shift points/diffs/ECU's, etc:
http://www.fordmods.com/forums/viewtopic.php?t=24060
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| commandojones |
|
|||
|
Disco Frank wrote: commandojones wrote: Do i need to worry about it?, its giving me no trouble yet hahah nar man it will not get into the insides of the box Cool 
_________________ EB 1 Fairmont - SOLD |
|||
| Top | |
|||
| green car |
|
||
|
SpeedyED wrote: Disco Frank wrote: mate it is the 1st i have heard of this problem the ecu is not specific to the diff for it to change gear it takes signals from the engine and the gearbox aka the transducer im guessing you put the wrong gear in your car many a member on here have changed their diffs and the spedo driven gear to match it and have no problems Green Car I seem to have no problems with it, I will be doing some more city driving to see the 60km/h bit so yeah. Sweet then, next time you floor it when you go onto the freeway see if it changes gear before the limiter.The speed will be correct but your shift points will be out, as you have been told. Good luck with that.
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| SpeedyED |
|
|||
|
snap0964 wrote: shift points/diffs/ECU's, etc:
http://www.fordmods.com/forums/viewtopic.php?t=24060 Lol, after reading that my shift points are out slightly, the old gear had 20 teeth, my new 1 has 21 teeth.
_________________ Pre AU Adapters for sale |
|||
| Top | |
|||
| TROYMAN |
|
||
|
SpeedyED wrote: snap0964 wrote: shift points/diffs/ECU's, etc: http://www.fordmods.com/forums/viewtopic.php?t=24060 Lol, after reading that my shift points are out slightly, the old gear had 20 teeth, my new 1 has 21 teeth. this is a tricky one? today i changed the diff in my ed from 3.08 to 3.27. i also changed the speedo gear from 20 teeth to 21 teeth. the speed is correct for the ratio. and it did not change the shift points at all?? the car was shifting at 4700 full throttle with the 3.08 and with the 3.27 it still shifts at 4700 rpm. maybe there is not enough difference between the 2 ratios to make any difference?? |
||
| Top | |
||
| SpeedyED |
|
|||
|
I will try this tomorrow. I have a 3:27 ratio, what revs should the car be doing going from 1st - 2nd in an Auto Troyman? is it what you say and it's 4700? If that's the case then I'll see if it's made a difference. If not then maybe it's hitting the rev limiter before the desired speed?
_________________ Pre AU Adapters for sale |
|||
| Top | |
|||
| TROYMAN |
|
||
|
im not sure what rpm its supposed to shift at in power but i would prefer it if it shifted at redline/5000 rpm..considering the rev limiter is about 5400 in a ed.
but its ok as this engine is still stock and its probably shifting at the right rpm for a stocko.. |
||
| Top | |
||
| SpeedyED |
|
|||
|
TROYMAN wrote: im not sure what rpm its supposed to shift at in power but i would prefer it if it shifted at redline/5000 rpm..considering the rev limiter is about 5400 in a ed.
but its ok as this engine is still stock and its probably shifting at the right rpm for a stocko.. I'll check it out tomorrow.
_________________ Pre AU Adapters for sale |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot], Google Adsense [Bot] and 138 guests |
