|
| Jakel123 |
|
|||
|
ok heres the plan. hoist the car up, slice off the rearmost muffler, weld on 2.25 inch piping all the way where it would have gone. i have an EF fairmont by the way. the 4.0 six.
so basically what i want to know is, will this improve performance, if not will it decrease. how much louder will it be. and are there any major reasons why i should not do it. also any tips on doing it would be nice. Note, i am going to do this if anybody cannot point out a major reason for not doing so, so tips such as pay for one or it doesnt look good are not really sufficient. cheers lads. Last edited by Jakel123 on Wed Aug 11, 2010 11:19 pm, edited 1 time in total. |
|||
| Top | |
|||
| frd906n |
|
||
|
just get a redback exhuast system or even a custom one, much better then chopping this and that
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| Jakel123 |
|
|||
|
im only wanting to do this cos its easy and free.
so yeh unless there is a major reason why i should not do it, im gonna do it. |
|||
| Top | |
|||
| jvangent |
|
||
|
i wont dont think you will see much improvement in performance.... noise level will go up tho.. dont know how much by tho...
|
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
with cost of cat back systems these days i'm surprised people even consider doing crap like that.
|
||
| Top | |
||
| Jakel123 |
|
|||
|
tickford_6 wrote: with cost of cat back systems these days i'm surprised people even consider doing crap like that. well the thing is im a school student, so im lacking in money for a cat back, but a mate has a hoist and some 2.25 inch piping. |
|||
| Top | |
|||
| gusbus |
|
||
|
itll sound better than one with the muffler there but not by much..might have a slight echo wen idling but better to find some 2.5inch pipe and weld it on...did that to a vp i used to have sounded better but not by much
|
||
| Top | |
||
| bbqburner |
|
|||
|
the middle muffler does most of the silencing, so if you want your car to sound better i would open up the middle muffler and do some modding there.
_________________ I enjoy the symphony of mechanical harmony, |
|||
| Top | |
|||
| skidder |
|
|||
|
As above, the resonator on the rear will just make it drone and sound like your typical p plater car if you pull it off.
_________________ EVL098 wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| FAST-XR |
|
|||
|
if its free go for it, if it doesnt work its not hard to fix!
just cut the rear muffler off and see what it sounds like before you start your pipe work, that way if it doesnt sound any good you can just reweld the peice you cut off, and you dont waste your time.
_________________ 07 BF MKII XR6T |
|||
| Top | |
|||
| krisisdog |
|
|||
|
lol it wont make it drone if you remove the rear muffler. I doubt there will be much difference at all in noise.... maybe you could cut out the first and second box, and weld in the smaller box before the diff, where the bigger box lived... more work for minimal gain!
|
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
I have a 2.25 cat back no name exhaust on my EB with only a centre sports muffler and it sounds very nice. So i say give it a go. Has also got a nice burble sound to it.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| skidder |
|
|||
|
krisisdog wrote: lol it wont make it drone if you remove the rear muffler. I doubt there will be much difference at all in noise.... maybe you could cut out the first and second box, and weld in the smaller box before the diff, where the bigger box lived... more work for minimal gain! Are you talking about the rear muffler (ie before the diff) or the resonator? Removing the resonator in the tailpipe made my car drone like crazy and sound like a stock 4cyl with an oversize cannon on it (had to cut it off as was about to fall off due to rust). It sounded so bad I was embarrassed to drive it for the week I had to like that until I got all the bits to make my new exhaust.
_________________ EVL098 wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| krisisdog |
|
|||
|
Rear resonator. I dont have any resonators, only a small single muffler box before the diff and I dont get any drone. I didnt even get any drone with it dumped straight out of the muffler before the diff.
|
|||
| Top | |
|||
| SLO247 |
|
||
|
It will make it a bit louder, but not as loud as a catback with just the one muffler.
Will sound fine, won't drone, even on an auto. Will just be a bit deeper and louder. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 71 guests |
