|
dingo ford |
|
||
|
Q. can you swap the computer from a el or ef & swap it with an au model computer any help would be greatlt appreciated
|
||
Top | |
Krytox |
|
|||
|
EF and EL cannot be swapped.
EF and AU Series 1 (smartlock) can be swapped apparently but i haven't had any success doing so. EF and AU run Coilpack. EA-ED, EL run Distributor and have 60odd pin ECU's. EF and AU run 100+ pins. they physically wont fit.
_________________ Carefree, we may not be number one, but we're up there. |
|||
Top | |
bry40l |
|
|||
|
Krytox wrote: EF and EL cannot be swapped. EF and AU Series 1 (smartlock) can be swapped apparently but i haven't had any success doing so. EF and AU run Coilpack. EA-ED, EL run Distributor and have 60odd pin ECU's. EF and AU run 100+ pins. they physically wont fit. yeah mate as krytox said, altho never herd of putting the au series 1 in the ef before and working
_________________ BF XR6 |
|||
Top | |
dingo ford |
|
||
|
thanks guys just wondering if it could be done may be someone will put au into ef
|
||
Top | |
twase |
|
|||
|
Also tried AU Series 1 into EF and failed. Its not a direct swap of the ECU's BTW, there are a significant number of pins that have changed between the EF and AU. I reworked the EF ECU and Engine loom to accomodate these changes and I went to a large amount of research before hand and even with the AU motor and sensors was unable to get Injectors firing or starter to work. I believe that the issue wass incompatability with the EF BEM.
As a final try I did try an AU BEM and that did not work out either due to it either not being the issue or it being faulty. In the end I gave up after a week with the car off the road and returned to the EF ECU.
_________________ BF Fairmont Ghia Series II update. |
|||
Top | |
Who is online |
---|
Users browsing this forum: Google [Bot] and 84 guests |