Hey all wanting to convert my 98 Futura Wagon to manual. I am concerned about the tailshaft i would like to know what tailshaft will fit if not the one i already have on the auto box any advice is appreciated.

presume this is for an Early Series 1 AU?

so you will need to shorten the tailshaft to suit. the place that normally does mine told me to find a steel shaft as they didn't do or had to send away [not sure what he said now] the alloy tailshafts. i found a steel unit.

unless you can find an original factory wagooon tailshaft. utes won't fit i believe [well the one i have here is to long].