Fordmods Logo

Coolant leak from pipe problem 

 

Page 1 of 1 [ 9 posts ] 

 
 Post subject: Coolant leak from pipe problem
Posted: Tue Jul 26, 2005 1:10 pm 
Getting Side Ways
Offline

Posts: 587

Joined: 25th Dec 2004

Gallery: 1 images

Ride: Falcon

Location: Sydney
NSW, Australia

Howdy,

I've been finding water under my car now and again and can't seem to find where its from - well, with a trusty torch I found it - it seems to be dripping from a pipe (not a hose, a solid pipe, about 3/4 diam) going to the motor just under the power steering pump.

Is this common and/or eas to repair? Is it just a seal or what?

Thanks,
M
Top
 Profile  
 
 
Posted: Tue Jul 26, 2005 1:53 pm 
Getting Side Ways
Offline
User avatar

Age: 51

Posts: 10128

Joined: 5th Nov 2004

Gallery: 4 images

Ride: EF Gli Ghia, XP Fairmont

Location: Perth
WA, Australia

ok i'm guess a bit here coz you haven't said what car you have. Is it the pipe which is also above the alternator. That's your heater pipe and yeah they do tend to corrode a bit. I had to replace my water pump and o-ring to fix that. Not hard.

 

_________________

Owning 1 of 67612 EF GLi Sedans made
FACT: "Chuck Norris owns the greatest Poker Face of all-time. It helped him win the 1983 World Series of Poker despite him holding just a Joker, a Get out of Jail Free Monopoly card, a 2 of clubs, 7 of spades and a green #4 card from the game Uno."

Top
 Profile  
 
 
Posted: Tue Jul 26, 2005 2:02 pm 
Getting Side Ways
Offline

Posts: 587

Joined: 25th Dec 2004

Gallery: 1 images

Ride: Falcon

Location: Sydney
NSW, Australia

Hi,
Sorry, its an AU Forte 6 cyl.

Funny question, but why would one need to change the water pump? Isn't that on the opposite side at the top?

Ta
Top
 Profile  
 
 
Posted: Tue Jul 26, 2005 2:03 pm 
Fordmods Junkie
Offline
User avatar

Age: 45

Posts: 1000493

Joined: 6th Nov 2004

Gallery: 2 images

Ride: AUXR6 HP With Ducati SupA Bike!

Location: Perth
WA, Australia

yes thats the 1 happy runs from the water pump to around the back of the block,

could be the oring seal that has gone so u might as well replace the water pipe as happy said while u are there
easy job.

 

_________________

RIP SCOTT

Top
 Profile  
 
 
Posted: Tue Jul 26, 2005 2:09 pm 
Getting Side Ways
Offline

Posts: 587

Joined: 25th Dec 2004

Gallery: 1 images

Ride: Falcon

Location: Sydney
NSW, Australia

Oops, its obvious I'm a learner in all things mechanical - I just looked at the workshop manual and yes, it looks like its where the pipe connects into the water pump.

So how does the pipe connect in? It looks like it just sits in the water pump, or is there a screw connector there somewhere?

So do you think I would need to replace the pipe, pump and gasket (ie gasket where the pipe connects to the pump). I assume the appropriate gaskets come with the pipe or pump?
Top
 Profile  
 
 
Posted: Tue Jul 26, 2005 2:33 pm 
Getting Side Ways
Offline
User avatar

Age: 51

Posts: 10128

Joined: 5th Nov 2004

Gallery: 4 images

Ride: EF Gli Ghia, XP Fairmont

Location: Perth
WA, Australia

I replaced my water pump because the housing the heater pipe went into corroded like I said. I happens and I didn't want water dripping onto my alt and f**k it up. The water pipe just pushes in with the oil ring sealing it.

 

_________________

Owning 1 of 67612 EF GLi Sedans made
FACT: "Chuck Norris owns the greatest Poker Face of all-time. It helped him win the 1983 World Series of Poker despite him holding just a Joker, a Get out of Jail Free Monopoly card, a 2 of clubs, 7 of spades and a green #4 card from the game Uno."

Top
 Profile  
 
 
Posted: Tue Jul 26, 2005 3:55 pm 
Getting Side Ways
Offline

Posts: 587

Joined: 25th Dec 2004

Gallery: 1 images

Ride: Falcon

Location: Sydney
NSW, Australia

Thanks muchly.

Sorry, I assumed from the first post it was the pipe that corroded, not the pump....

thanks again.
M
Top
 Profile  
 
 
Posted: Wed Jul 27, 2005 9:13 pm 
Getting Side Ways
Offline
User avatar

Age: 50

Posts: 2705

Joined: 6th Nov 2004

Gallery: 11 images

Ride: 2009 FG XR6 Sedan

Location: Melbourne
VIC, Australia

there is actaully 2 steel heater pipes, one from water pump to rear of motor and the other from thermostat to rear of motor.
Top
 Profile  
 
 
Posted: Fri Jul 29, 2005 7:10 pm 
Stock as a Rock
Offline
User avatar

Posts: 158

Joined: 12th Apr 2005

Gallery: 8 images

Location: East Burwood
VIC, Australia

i had the same prob in my ef... i just got a new o ring for it

 

_________________

Past: 150rwkw 5spd EF Futura - 4499's, 2.5" exh, Intake, Filter, Wade 1636, Head and Valve Work, Raised Comp.

Present: 5spd AUIII XR6 VCT Ute - 4480's, 2.5" exh, Tickford Intake, Pod in Box.
coming soon: 3.9:1 diff, Flashtune.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 9 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 42 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 24, 2024 9:02 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names