hi all replacing my head gasket, and while its out i thought id rebuild my cooling system.... jus wanting some input or sugestions


i am so far replacing all hoses, twin electric thermo fans, high pressure resivor, new thermostat and thats bout it so far...

not to sure if replacing water pump would make 2 much difference as i have relaced it recently... any 1 no if ther is a high performance 1 or a better upgrade

Take out all the welsh plugs on the starter motor side of the block and run a hose thru all the holes u will be surprised at what comes out refit brass plugs and apply a sealant around cup side try to a socket that is a snug fit in the welsh plug seat plug 3 to 5mm into the outside face


Gassa