hey all

i have a problem i have done the conversion from cpi to mpi everything seems fine but i dont have any spark not starting

all the injectors are working and the fuel pump is ok and it was running fine before the conversion so i am guessing its nothing to do with the coil and distributor so any help would be great

also i took off the old manifold setup and forgot where the regulator pipe goes and the map sensor goes also if anyone knows when i bought the car there were three vacuum pipes coming from near the washer bottle that were not connected does anyone know where they go are they all vaccum all three

thankx again

Did u change over the Dizzy and coil from CPI to MPFI because they are completly different. I actully had this same problem, it ended up being a Wire that i had forgot to connect up

is there a pink wire down near the ISC that isn't connected?

yer those vacuam lines i wanna know were they go aswell as mine aint hooked up ( ithink there heater controls i aint got heater

yea the pink wire is there i got the mpi setup out of my old na fairlane

what does it do and where does it go

From memor it goes up into one of the looms near the map sensor. Cant remember what wire it is ment to aline with tho, just put it into whateva wire doesnt have a partner, it could also be pink