|
| Darkr |
|
|||||
|
Okay, I've had my Ba for just over 4 weeks now, and I decided to give her a run on the dyno.
Went to APC Performance in Wangara, and while they are pretty good, I payed $90 for like 15mins on a dyno. Pretty happy with the result for a bone stock car though, 185.3HP or 138.18rwkw. The tourqe curve was very flat, and you can see where the exaust causes a bottleneck. I should be able to get to 200HP easy with exaust, extractors, high flow cat, and typhoon intake and my fordmods sticker(that comes sunday). I took photo's and video's too 
See http://www.youtube.com/watch?v=aSK4DPN_74g for a video.
|
|||||
| Top | |
|||||
| rebbs |
|
||
|
hey nice power but form the dyno looks like u need a bit of a tune
heres mine http://img133.imageshack.us/my.php?imag ... 3163vp.jpg bit less power but tuned fro eco for now lol |
||
| Top | |
||
| Darkr |
|
|||
|
Apparently that's it suffocating.
It needs cold air intake, and exaust etc. Plus it's running s**t fuel. |
|||
| Top | |
|||
| smiley235 |
|
|||
|
Darkr wrote: I should be able to get to 200HP easy with exaust, extractors, high flow cat, and typhoon intake and my fordmods sticker(that comes sunday).
with those mods above, your looking at least 170rwkw.
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| rebbs |
|
||
|
Darkr wrote: Apparently that's it suffocating.
It needs cold air intake, and exaust etc. Plus it's running s**t fuel. im runnin stock everything and 98octane fuel |
||
| Top | |
||
| smiley235 |
|
|||
|
high octane fuel makes quite a difference in power.
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| rebbs |
|
||
|
i didnt feel much of a difference in power wen i changed fuel. but it feels alot smother now
|
||
| Top | |
||
| smiley235 |
|
|||
|
When I ran 98 octane, I felt about the same differnce as (a typhoon intake and K&N) which although is small may have given me an extra 8rwkw.
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| rebbs |
|
||
|
thats alright
do u alwasy run it or just than and again |
||
| Top | |
||
| stomper |
|
|||
|
rebbs wrote: thats alright
do u alwasy run it or just than and again Depending what im doing i run 91 or 98. I found that the car runs smoother on 98 ron and that it it took off a little better. Typhoon intake and a full exhaust would be very nice. I think that the ford motor suffers choking too much.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| HaZZa |
|
|||
|
just word of warning had alot of work done on my eb bout 2 years ago . and they f**k alot up .
zorst fell off one time melted rear bumper weld were s**t house charged for dyno time and cold air intake and was never done. ended up getting 400 bucks back for work i payed for but didnt get done . |
|||
| Top | |
|||
| 68stang |
|
||
|
Darkr wrote: Okay, I've had my Ba for just over 4 weeks now, and I decided to give her a run on the dyno.
Went to APC Performance in Wangara, and while they are pretty good, I payed $90 for like 15mins on a dyno. Pretty happy with the result for a bone stock car though, 185.3HP or 138.18rwkw. The tourqe curve was very flat, and you can see where the exaust causes a bottleneck. I should be able to get to 200HP easy with exaust, extractors, high flow cat, and typhoon intake and my fordmods sticker(that comes sunday). I took photo's and video's too See http://www.youtube.com/watch?v=aSK4DPN_74g for a video. ive never had a car dyno'd. just curious, what prevents the car slingshoting off? i.e what is holding the car in place? |
||
| Top | |
||
| OBS35N |
|
|||
|
they strap the car down with these things that look like seatbelts attached to the undercarrage
_________________ OBS35N is gooonnnneeee.
|
|||
| Top | |
|||
| andrewts |
|
|||
|
They strap seatbelts to the ground and the back. or they can chock the front wheels I'm guessing.
EDIT: BEATEN! Those ford guys are so much faster than my poor Holden outfitting. 
|
|||
| Top | |
|||
| Darkr |
|
|||
|
68stang wrote: ive never had a car dyno'd. just curious, what prevents the car slingshoting off? i.e what is holding the car in place?
I more or less dyno'd mine out of curiousity, it was rather fun
I didn't see any slings attached, and I didnt even see a point they could have fixed them from, saying this I didn't see the back of the car while it was on, but I watched the whole time, and all he did was put little wedges in front of the car :/ He removed them and then moved the car off, somehow ? That part puzzled me. He had a little trouble getting it on, but soon as it was on it just sat there rolling (it's auto). |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 54 guests |
