Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Dyno run 

 

Page 1 of 1 [ 10 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
cjh
 Post subject: Dyno run
Posted: Mon Aug 13, 2012 12:19 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia
Finally got round to doing a dyno run on my ED sedan......the last one was over 2 years ago.
I got 219.5 hp at the treads....or 161 kw in metric speak.
Looks like I need new valve springs.

 

 

Attachments:
IMGP10924.JPG
IMGP10924.JPG [ 309.98 KiB | Viewed 210 times ]

 

_________________

http://youtu.be/jJTh9F3Vgg0
Top
 Profile  
 
 
Benny D
 Post subject: Re: Dyno run
Posted: Mon Aug 13, 2012 3:34 pm 
Getting Side Ways
Offline
User avatar

Age: 37

Posts: 1507

Joined: 14th Aug 2009

Gallery: 12 images

Ride: BA XT V8

Location: Gosnells, Perth
WA, Australia
impressive for a ed. didnt they come out with about 150 fwkw?

 

_________________

BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%.
13.65@102mph. 2800 hi-Stall.
230RWKW@5250 rpm. 625NM.
Top
 Profile  
 
 
phongus
 Post subject: Re: Dyno run
Posted: Mon Aug 13, 2012 4:28 pm 
Fordmods Junkie
Offline
User avatar

Posts: 11752

Joined: 17th May 2005

Gallery: 11 images

Ride: EL Fairmont, VFR400 racer

Power: 144 rwkw

Location: Melbourne
VIC, Australia
nice work there cjh :). Is that the one with your home port/polish EA head?

I need to give my car some TLC before I put it on the dyno again. She has been losing power though, so I doubt I'd get the same figures as before even with the J3, AU injectors and 300kpa.

 

_________________

phongus = Post whore 2006
EL XR6 motor, EL ECU + J3 chip, WADE 1673 Camshaft, 3" S/S intake, Pacy 4480, 2.5" Hi flow cat, 2.5" Lukey exhaust.
Max Power = 144.6 rwkw (03/05/2008)
Top
 Profile  
 
 
cjh
 Post subject: Re: Dyno run
Posted: Tue Aug 14, 2012 1:58 am 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia
phongus wrote:
nice work there cjh :). Is that the one with your home port/polish EA head?



Yep, the same head with standard valves and springs.
That head has never seen a flow bench either, all done by me with just "feel" and "looking".
The "swirl ridges" are intact, just rounded off so there are no sharp edges.
The bottom end is original unopened.
I think ED's were like 147/148 kw at the flywheel back in the day......someone clarify...????

 

_________________

http://youtu.be/jJTh9F3Vgg0
Top
 Profile  
 
 
ghia97
 Post subject: Re: Dyno run
Posted: Wed Aug 15, 2012 1:00 am 
Getting Side Ways
Offline

Posts: 669

Joined: 31st Aug 2007

Gallery: 1 images

Ride: 08 BF Ghia

Location: Melbourne
VIC, Australia
148 KW
Top
 Profile  
 
 
thebeast.
 Post subject: Re: Dyno run
Posted: Wed Aug 22, 2012 9:25 pm 
Parts Gopher
Offline

Age: 36

Posts: 56

Joined: 1st Apr 2009

Ride: EL Falcon

Power: 102 rwkw

Location: Mooloolaba
QLD, Australia
Decent effort. What's beet done to it. Mine was on dyno and made few kw less
Top
 Profile  
 
 
cjh
 Post subject: Re: Dyno run
Posted: Thu Aug 23, 2012 10:03 am 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia
thebeast. wrote:
Decent effort. What's beet done to it. Mine was on dyno and made few kw less


Most of what I have done is here...... the-garage-f53/new-ed-project-car-t73529.html

 

_________________

http://youtu.be/jJTh9F3Vgg0
Top
 Profile  
 
 
GeZza200
 Post subject: Re: Dyno run
Posted: Thu Aug 23, 2012 11:07 am 
Getting Side Ways
Offline

Age: 36

Posts: 2563

Joined: 19th Feb 2007

Gallery: 21 images

Ride: 98 EL Futura

Power: 199 rwkw

Location: Lilydale
VIC, Australia
That's bloody good power with what you have done to the car. Have you taken it down the strip yet?

 

_________________

EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come
Top
 Profile  
 
 
cjh
 Post subject: Re: Dyno run
Posted: Fri Aug 24, 2012 7:27 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia
GeZza200 wrote:
That's bloody good power with what you have done to the car. Have you taken it down the strip yet?


Naaaahh........but I'd like to though.....I have to fit a tailshaft loop....local rules here.....the track is about a 250km round trip.

 

_________________

http://youtu.be/jJTh9F3Vgg0
Top
 Profile  
 
 
cjh
 Post subject: Re: Dyno run
Posted: Sun Aug 26, 2012 12:22 am 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia
Well.......I've fitted new valve springs, Crow Cams p# 7739-12 XR6 springs, and it hasn't helped... :(
Looks like i'll need to tune it some more.....???

 

 

Attachments:
IMGP12049.JPG
IMGP12049.JPG [ 421.73 KiB | Viewed 180 times ]

 

_________________

http://youtu.be/jJTh9F3Vgg0
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 10 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: No registered users and 47 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Nov 24, 2024 7:17 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names