|
| Johnson stroker |
|
|||
|
ok how about actually witnessing the install and then being passenger in the car once e-series cam and rocker gear are installed.. is that good enough? or would you perhaps like me to be the actual owner of the car too? Sorry I don't underrstand what more you could be after?
_________________
|
|||
| Top | |
|||
| green car |
|
||
|
I have an ef with an au head and if someone gives me a cam i will prove the point
 Because i know it can be done.
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| ebxr82nv |
|
||
|
green car wrote: I have an ef with an au head and if someone gives me a cam i will prove the point
Because i know it can be done.But are you using the eseries rockers? I should have been more specific in my question, will it run using au rockers?
_________________ 9/98 AU1 XR6hp-about to retire from the road and be reborn on the race track. |
||
| Top | |
||
| Steady ED |
|
|||
|
ebxr82nv wrote: green car wrote: I have an ef with an au head and if someone gives me a cam i will prove the point Because i know it can be done.But are you using the eseries rockers? I should have been more specific in my question, will it run using au rockers? No.
_________________ ED XR8 Sprint - S-Trim, V500, 249rwkw |
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
why has no one realized that bolting some 2:1 rockers on to their stock camed AU may actualy be a cheap upgrade.
same way the V8 girls buy high ratio rockers and the V6 commo kids do the same. |
||
| Top | |
||
| ebxr82nv |
|
||
|
have you done this with any sucess tickford? I can see what you're saying, e series rockers would effectively give a higher valve lift on a standard cam.
Please correct me if I'm wrong
_________________ 9/98 AU1 XR6hp-about to retire from the road and be reborn on the race track. |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
ebxr82nv wrote: have you done this with any sucess tickford? I can see what you're saying, e series rockers would effectively give a higher valve lift on a standard cam.
Please correct me if I'm wrong I've never had an AU that i could play with. so long as the valve springs are up to it and there are no clearance problems with valves and pistons there is no reason it won't work. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 59 guests |
